Function Key ProgrammingFunction Keys - Page 39
FwNOf - Forward On No Answer Off Switches the extension to forward on no answer off.
This function does not required any data to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing FwNOf switches the extension's use of forward on no answer off.
Can also be used in conjunction with FwNOn - Forward On No Answer On on page 39.
[User Digital Telephony Advanced Forward Forward On No Answer Off]
FwUOn - Forward Unconditional On
Switches the extension to forward all its calls except hunt group calls.
Note: When Call Appearance keys have been allocated, all the call appearance lines must be in use before this function becomes active.
This function does not required any data to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing FwUOn toggles the extension's forward on busy state. When on, FwUOn is shown with a symbol and the display includes a D. When on, calls are forwarded to the extension's forward number (see FwBNo - Forward On Busy Number on page 38).
[User Digital Telephony Advanced Forward Forward Unconditional On]
FwUOf - Forward Unconditional Off
Switches the extension’s forward unconditional off.
This function does not required any data to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing FwUOf switches the extension's use of forward unconditional off. Can also be used in conjunction with FwUOn - Forward Unconditional On on page 40.
[User Digital Telephony Advanced Forward Forward Unconditional Off]
GrpPg - Group Paging (!)
This function can be programmed with or without a target extension or group number. This function can be programmed through the phone by the user using an Admin key.
If programmed with a target number, the GrpPg key displays that number. When GrpPg is pressed, it will make a paging call to that number.
If programmed without a target number, the number must be dialed after the user presses GrpPg.
[User Digital Telephony Emulation Group Paging]
HdSet - Headset Toggle (!)
This function does not require any data entered when programmed. This function can be programmed through the phone by the user using an Admin key.
The programmed key will then switch the phone between handset and headset operation. When on, HdSet is shown on a dark background.
There is no linkage between a programmed HdSet key and the phone's HEADSET key.
[User Digital Telephony Advanced Miscellaneous Headset Toggle]
IP Office 5410 User’s Guide | Function Keys - Page 39 |
40DHB0002UKEY – Issue 1 (7th February 2005) | Function Key Programming |