Function Key Programming | Function Keys - Page 41 |
HGDis - Hunt Group Disable
Sets the extension's group membership as disabled. This function does not take the Hunt Group Out of Service.
This function can be programmed with or without a target group number. This function cannot be programmed through the phone by the user.
If programmed without a group number, pressing 
HGDis disables all the extension's group memberships.
If programmed with a group number, pressing 
HGDis disables just the extension's membership of that group.
[User Digital Telephony Advanced Hunt Group Hunt Group Disable]
HGNS+ - Set Hunt Group Night Service (!)
Put a specific hunt group into night service mode.
This function requires the hunt group number to be entered when programmed. The hunt group number is then shown next to HGNS+. This function can be programmed through the phone by the user using an 
Admin key.
Pressing 
HGNS+ puts the hunt group into night service. Group calls then go to its night service fallback group if set or, if not answered, to voicemail.
[User Digital Telephony Advanced Set Set Hunt Group In Service]
HGNS- - Clear Hunt Group Night Service
Returns a hunt group that has been manually put into night service back to normal service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42.
This function requires that the hunt group number is entered when programmed. This function cannot be programmed through the phone by the user.
The hunt group number is shown next 
HGNS- puts the group back into normal service if in night service.
[User Digital Telephony Advanced Call Clear Hunt Group Night Service]
HGOS+ - Set Hunt Group Out of Service
Put a specific hunt group out of service mode.
This function requires the hunt group number to be entered when programmed. The hunt group number is then shown next to HGOS+. This function cannot be programmed through the phone by the user.
Pressing 
HGOS+ puts the hunt group out of service. Group calls then go to its out of service fallback group if set or, if not answered, to voicemail.
[User Digital Telephony Advanced Set Set Hunt Group Out Service]
HGOS- - Clear Hunt Group Out of Service
Returns a hunt group that has been manually put into out of service back to normal service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42.
This function requires that the hunt group number is entered when programmed. This function cannot be programmed through the phone by the user.
The hunt group number is shown next 
HGOS- puts the group back into normal service if in night service.
[User Digital Telephony Advanced Call Clear Hunt Group Out Of Service]
IP Office 5410 User’s Guide | Function Keys - Page 41 |
40DHB0002UKEY – Issue 1 (7th February 2005) | Function Key Programming |