Page 52 - Function Key ProgrammingFunction Keys
Suspe - Suspend Call
Suspend the current call at the exchange.
If no exchange slot number is specified when the function is programmed, exchange slot 0 is used. This function cannot be programmed through the phone by the user.
Pressing 
Suspe is only supported if the exchange provides a Q.931 suspend call facility.
[User Digital Telephony Advanced Suspend Suspend Call]
See also:
•Resum - Resume Call on page 51.
Timer - Timer (!)
Starts a timer on the phone's display.
This function does not require any data entered when programmed. This function can be programmed through the phone by the user using an 
Admin key.
The timer is reset for each new call made or answered. When timer mode is selected, a 
is shown next to Timer.
[User Digital Telephony Emulation Timer]
TmDay - Time of Day (!)
Replaces the user name and number details on the phone display with the date and time.
This function does not require any data entered when programmed. This function can be programmed through the phone by the user using an 
Admin key.
When time and date mode is selected, a 
is shown next to TMDay.
[User Digital Telephony Emulation Time of Day]
Toggl - Toggle Calls
Cycle through each of the extension user's current held calls.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
Pressing 
Toggl puts the user's current call on hold and connects a previously held call.
[User Digital Telephony Advanced Call Toggle Calls]
VMRB- - Voicemail Ringback Off
Switches voicemail ringback for the extension off.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
The 
VMRB- key switches voicemail ringback for the extension off.
[User Digital Telephony Advanced Voicemail Voicemail Ringback Off]
Page 52 - Function Keys | IP Office 5410 User’s Guide |
Function Key Programming | 40DHB0002UKEY – Issue 1 (7th February 2005) |