Page 6 - Overview of the 5410 | The 5410 Telephone |
The 5410 Telephone
Overview of the 5410
This guide covers the use of the Avaya 5410 telephone, running in Key and Lamp mode, on Avaya IP Office telephone systems operating with Level 3.0 software and the 5410 telephone’s software running at REL:2.00 or higher (see Using Self Test on page 21) The diagram below shows the main 5410 telephone features.
1.Display, Call Appearance and Function keys: Call Appearance Keys allow the user to handle multiple calls and the display shows call information. System functions (allocated by your System Administrator) can also be displayed. See Call Appearance Keys on page 7 and Function Keys on page 23.
2.Message lamp - Lit when the user has voicemail messages. Can also be set to flash when the phone is ringing.
3.
Previous/Next Page - Move through the different pages of the call handling, speed dials and call log screens. Also used to move the cursor during data entry.
4.
Messages: Access the user's mailbox.
5.Call Handling Buttons: See Basic Call Handling Features on page 9.
•Hold: Place call on hold.
•Transfer: Transfer call.
•Conference: Conference held calls.
•Drop: Drop call.
•Redial: Redial last number dialed.
6.Dial pad: Standard
7.
Volume Controls: Adjust the speaker, handset, headset, or ringer volume depending on which is currently in use.
8.Handset and Headset Sockets: The sockets for both the headset and handset cables can be found on the side of the telephone.
9.
Mute: Turns the microphone on/off. When in use, the associated light is on and the caller cannot hear you.
Page 6 - The 5410 Telephone | IP Office 5410 User’s Guide |
Overview of the 5410 | 40DHB0002UKEY – Issue 1 (7th February 2005) |