Panasonic KX-TG1840NZ operating instructions Setting call restriction, Turning call bar on/off

Page 33

Base Unit Settings

list to the phone number “123-456-7890”, the unit dials “456-7890”.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select “Call Options”, then press {>}.

5Select “ARS Settings”, then press {>}.

6Select “Area Code”, then press {>}.

7Select an area code location (1 to 4), then press {>}.

LIf the location already contains an area code, the code is displayed.

8Enter an area code (5 digits max.), then press {j/OK}.

9Press {ih}.

Note:

LThe use of this feature can prevent a National Call from being dialled. E.g., in the case of the South Island, the “03” will be omitted and will therefore prevent a National Call to other areas of the South Island.

Setting call restriction

You can restrict the base unit or selected handsets from dialling certain numbers. Up to 6 phone numbers can be stored. Storing area codes here will prevent the restricted extensions (the base unit or selected handsets) from dialling any phone number in that area code.

Important:

LCall restriction can be set using handset 1

only. (To confirm which handset is handset 1, press {x} and {1} on the base unit. Handset 1 will ring.)

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select “Call Options”, then press {>}.

5Select “Call Restrict”, then press {>}.

LThe base unit extension number “0” and the extension numbers of all registered handsets are displayed.

6Select the extensions which will be restricted by pressing the desired number.

LFlashing numbers indicate call restriction is turned on for the corresponding extension.

LTo turn call restriction off for an extension, press the dial key corresponding to its extension number. The number will stop flashing.

7Press {j/OK}.

8Select a memory location, then press {>}.

LIf the memory location already contains a restricted number, the number is displayed.

9Enter the phone number or area code to

be restricted (8 digits max.), then press {j/OK}.

LTo erase a restricted number, press {C/T}.

10Press {ih}.

Turning call bar on/off

This feature prohibits making outside calls with the base unit. When call bar is turned on, only intercom calls and calls to emergency numbers (page 32) can be made. Call bar can be set independently for the handset (page 28) and the base unit.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Model No. KX-TG1840NZ Introduction Feature highlights Useful Information Accessory information Included accessoriesAdditional/replacement accessories Important information Battery cautionGeneral EnvironmentControls Controls and displaysDisplays Base unit display icons ConnectionsBattery installation Battery chargeBattery strength Battery icon Battery replacement Turning the power on/offSetting the date and time Example 330 PM Redial feature Making calls using the handsetVoice enhancer Other featuresTo erase numbers in the redial list Handset phonebook Key lockButton to use the recall feature Making calls using the base unitPause button for PBX/long distance service users Recording a telephone conversation using the handsetTo redial the last number dialled To adjust the speaker volumeAnswering calls using the base unit Answering calls using the handsetAdding entries to the handset phonebook Handset phonebookCategories Finding and calling a handset phonebook entryPhonebook Erasing entries from the handsetOne touch dial Editing entries in the handset PhonebookMaking a call using a one touch dial key Chain dialErasing a one touch dial assignment Shared phonebook Adding entries to the shared phonebookFinding and calling a shared phonebook entry Erasing entries from the shared phonebook Editing entries in the shared phonebookChanging a name, phone number, audible call Playing back an audible call announcementCopying handset phonebook entries to other handset Copying phonebook entriesCopying handset phonebook entries to the shared phonebook Copying one entryHandset settings Sub-menu Default setting Menu Guide to handset settingsRinger setup Time settingsAlarm Ringer volumeSetting the start and end time for night mode Night modeTurning night mode on/off Setting the ring delay for night modeSelecting the standby mode display Display setupSelecting categories to bypass night mode Changing the display languageOther options Call optionsResetting the handset to its default settings Base unit Sub-menu Default setting Settings menu Guide to base unit settingsNight mode Changing the recall time Setting pause lengthStoring/changing emergency numbers Selecting area codes to be deleted automaticallySetting call restriction Changing the base unit PIN Personal Identification Number Resetting the base unit to its default settingsCategory features for handset phonebook Using Caller ID serviceAudible call for shared phonebook Caller listViewing the caller list and calling back Editing a caller’s phone number before calling backStoring caller information into the handset phonebook Call minderGreeting message Answering systemUsing the handset Using a prerecorded greeting messageListening to messages Playing back the greeting messageErasing all messages Listening to new/all messagesDirect command operation using the handset Calling back using the handset Caller ID subscribers onlyKey Direct commands Remote operation Using the answering system remotelyTurning remote operation on/off Voice guidanceKey Remote command Remote commandsAnswering Default System setting Setting Turning on the answering system remotelySelecting the caller’s recording time Turning call screening on/offTurning message alert on/off Answering System Features Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base unitsSelecting a base unit Cancelling a handsetIntercom Cancelling a base unitIncreasing the range of the base unit Between a handset and the base unitBetween handsets From a handset to the base unitFrom the base unit to a handset Transferring a call without speaking to the handset user Screws Hook 108 mm Wall mountingCharacter entry modes Available character entriesExtended 1 character table N Extended 2 character table OCyrillic character table P Troubleshooting Initial settingsProblem Cause & solution Telephone Redial the number manually Answering system Specifications PIN IndexIndex Copyright Customer Support Centre Tel. No 272 Sales Department
Top Page Image Contents