Panasonic KX-TG1840NZ operating instructions Ringer setup, Night mode

Page 31

Base Unit Settings

Ringer setup

Night mode

Night mode allows you to select a block of time during which the base unit will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 26) and the base unit.

Set the date and time beforehand (page 11).

Note:

LTo avoid disturbances, we recommend turning the call screening feature off (page 44) in addition to turning the night mode feature on.

Setting the start and end time for night mode

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “Start/End”, then press {>}.

7Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

8Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

9Press {j/OK}.

10Press {ih}.

Turning night mode on/off

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “On/Off”, then press {>}.

7Select “On” or “Off”, then press {>}.

8Press {ih}.

Setting the ring delay for night mode

This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected amount of time passes, the base unit will ring. If you select “No Ringing”, the base unit will not ring during night mode.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

34).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “Ring Delay”, then press {>}.

7Select the desired setting, then press {>}.

8Press {ih}.

Note:

LWhen the answering system answers the call, this feature does not work.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model No. KX-TG1840NZ Introduction Feature highlights Useful Information Included accessories Accessory informationAdditional/replacement accessories Environment Battery cautionImportant information GeneralControls Controls and displaysDisplays Base unit display icons ConnectionsBattery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Redial feature Making calls using the handsetHandset phonebook Key lock Other featuresVoice enhancer To erase numbers in the redial listRecording a telephone conversation using the handset Making calls using the base unitButton to use the recall feature Pause button for PBX/long distance service usersTo redial the last number dialled To adjust the speaker volumeAnswering calls using the base unit Answering calls using the handsetFinding and calling a handset phonebook entry Handset phonebookAdding entries to the handset phonebook CategoriesEditing entries in the handset Phonebook Erasing entries from the handsetPhonebook One touch dialChain dial Making a call using a one touch dial keyErasing a one touch dial assignment Adding entries to the shared phonebook Shared phonebookFinding and calling a shared phonebook entry Playing back an audible call announcement Editing entries in the shared phonebookErasing entries from the shared phonebook Changing a name, phone number, audible callCopying one entry Copying phonebook entriesCopying handset phonebook entries to other handset Copying handset phonebook entries to the shared phonebookHandset settings Sub-menu Default setting Menu Guide to handset settingsRinger volume Time settingsRinger setup AlarmSetting the ring delay for night mode Night modeSetting the start and end time for night mode Turning night mode on/offChanging the display language Display setupSelecting the standby mode display Selecting categories to bypass night modeOther options Call optionsResetting the handset to its default settings Base unit Sub-menu Default setting Settings menu Guide to base unit settingsNight mode Selecting area codes to be deleted automatically Setting pause lengthChanging the recall time Storing/changing emergency numbersSetting call restriction Changing the base unit PIN Personal Identification Number Resetting the base unit to its default settingsCategory features for handset phonebook Using Caller ID serviceEditing a caller’s phone number before calling back Caller listAudible call for shared phonebook Viewing the caller list and calling backStoring caller information into the handset phonebook Call minderGreeting message Answering systemPlaying back the greeting message Using a prerecorded greeting messageUsing the handset Listening to messagesErasing all messages Listening to new/all messagesCalling back using the handset Caller ID subscribers only Direct command operation using the handsetKey Direct commands Voice guidance Using the answering system remotelyRemote operation Turning remote operation on/offTurning on the answering system remotely Remote commandsKey Remote command Answering Default System setting SettingTurning call screening on/off Selecting the caller’s recording timeTurning message alert on/off Answering System Features Additional base units Operating additional unitsRegistering a handset to a base unit Additional handsetsSelecting a base unit Cancelling a handsetBetween a handset and the base unit Cancelling a base unitIntercom Increasing the range of the base unitFrom a handset to the base unit Between handsetsFrom the base unit to a handset Transferring a call without speaking to the handset user Screws Hook 108 mm Wall mountingCharacter entry modes Available character entriesExtended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Redial the number manually Answering system Specifications PIN IndexIndex Copyright Customer Support Centre Tel. No 272 Sales Department
Top Page Image Contents