Panasonic KX-TG1840NZ Time settings, Ringer setup, Alarm, Ringer volume, Changing ringtones

Page 25

Handset Settings

Time settings

Alarm

An alarm will sound for 3 minutes at the set time once or daily. Set the date and time beforehand (page 11).

1Press {j/OK}.

2Select Handset Setup, then press {>}.

3Select Time Settings, then press {>}.

4Select Alarm, then press {>} 2 times.

5Select an alarm mode, then press {>}.

Once: The alarm will sound once at the set time. Enter the desired day and month by selecting 2 digits for each.

Daily: An alarm will sound daily at the set time.

Off: Turns the alarm off. Press {>} again, then press {ih} to finish.

6Enter the desired hour and minute by selecting 2 digits for each.

LYou can select AM, PMor 24-hour time entry by pressing {*} repeatedly.

7Press {j/OK}.

8Select the ringtone that will sound at the set time, then press {>}.

9Select Save, then press {>}.

10Press {ih}.

Note:

LTo stop the alarm, press any dial key.

LWhen in talk or intercom mode, the alarm will not sound until the call has ended.

LThe alarm will sound at the set time even when the ringer volume is turned off.

LIf you select Once, the setting will change to Offafter the alarm sounds.

Ringer setup

Ringer volume

1Press {j/OK}.

2Select Handset Setup, then press {>}.

3Select Ringer Setup, then press {>}.

4Select Ringer Volume, then press {>}.

5Press {e} or {v} repeatedly to select the desired volume.

6Press {>}.

7Press {ih}.

Note:

LAlarms will sound and the handset will ring for intercom calls and when paged even if the ringer is turned off.

Changing ringtones

You can change the ringtone used by the handset.

Ext. Ringtone: Selects the ringtone for outside calls.

Int. Ringtone: Selects the ringtone for intercom calls.

1Press {j/OK}.

2Select Handset Setup, then press {>}.

3Select Ringer Setup, then press {>}.

4Select the desired item, then press {>}.

5Select the desired ringtone, then press {>}.

6Press {ih}.

Note:

LIf you select one of the melody ringtones, the ringtone will continue to sound for

25

Image 25
Contents Model No. KX-TG1840NZ Introduction Feature highlights Useful Information Included accessories Accessory informationAdditional/replacement accessories Important information Battery cautionGeneral EnvironmentControls Controls and displaysDisplays Base unit display icons ConnectionsBattery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Redial feature Making calls using the handsetVoice enhancer Other featuresTo erase numbers in the redial list Handset phonebook Key lockButton to use the recall feature Making calls using the base unitPause button for PBX/long distance service users Recording a telephone conversation using the handsetTo redial the last number dialled To adjust the speaker volumeAnswering calls using the base unit Answering calls using the handsetAdding entries to the handset phonebook Handset phonebookCategories Finding and calling a handset phonebook entryPhonebook Erasing entries from the handsetOne touch dial Editing entries in the handset PhonebookChain dial Making a call using a one touch dial keyErasing a one touch dial assignment Adding entries to the shared phonebook Shared phonebookFinding and calling a shared phonebook entry Erasing entries from the shared phonebook Editing entries in the shared phonebookChanging a name, phone number, audible call Playing back an audible call announcementCopying handset phonebook entries to other handset Copying phonebook entriesCopying handset phonebook entries to the shared phonebook Copying one entryHandset settings Sub-menu Default setting Menu Guide to handset settingsRinger setup Time settingsAlarm Ringer volumeSetting the start and end time for night mode Night modeTurning night mode on/off Setting the ring delay for night modeSelecting the standby mode display Display setupSelecting categories to bypass night mode Changing the display languageOther options Call optionsResetting the handset to its default settings Base unit Sub-menu Default setting Settings menu Guide to base unit settingsNight mode Changing the recall time Setting pause lengthStoring/changing emergency numbers Selecting area codes to be deleted automaticallySetting call restriction Changing the base unit PIN Personal Identification Number Resetting the base unit to its default settingsCategory features for handset phonebook Using Caller ID serviceAudible call for shared phonebook Caller listViewing the caller list and calling back Editing a caller’s phone number before calling backStoring caller information into the handset phonebook Call minderGreeting message Answering systemUsing the handset Using a prerecorded greeting messageListening to messages Playing back the greeting messageErasing all messages Listening to new/all messagesCalling back using the handset Caller ID subscribers only Direct command operation using the handsetKey Direct commands Remote operation Using the answering system remotelyTurning remote operation on/off Voice guidanceKey Remote command Remote commandsAnswering Default System setting Setting Turning on the answering system remotelyTurning call screening on/off Selecting the caller’s recording timeTurning message alert on/off Answering System Features Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base unitsSelecting a base unit Cancelling a handsetIntercom Cancelling a base unitIncreasing the range of the base unit Between a handset and the base unitFrom a handset to the base unit Between handsetsFrom the base unit to a handset Transferring a call without speaking to the handset user Screws Hook 108 mm Wall mountingCharacter entry modes Available character entriesExtended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Redial the number manually Answering system Specifications PIN IndexIndex Copyright Customer Support Centre Tel. No 272 Sales Department