Panasonic KX-TG1840NZ Important information, General, Environment, Location, Battery caution

Page 6

Preparation

Important information

General

LUse only the AC adaptor included with this product, noted on page 5.

LDo not connect the AC adaptor to any AC outlet other than a standard 220–240 V AC outlet.

LThis product is unable to make calls when:

The portable handset battery(ies) need recharging or have failed.

There is a power failure.

The key lock feature is turned on.

The call bar feature is turned on (only phone numbers stored in the unit as emergency numbers can be called).

LDo not open the base unit or handset other than to replace the battery(ies).

LThis product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.

LCare should be taken that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this product to excessive smoke, dust, mechanical vibration or shock.

Environment

LDo not use this product near water.

LThis product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C.

LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible.

Warning:

LTo prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture.

LUnplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised service centre.

Location

LFor maximum distance and noise-free operation, place your base unit:

Away from electrical appliances such as TVs, radios, personal computers or other phones.

In a convenient, high and central location.

Battery caution

LWe recommend using the battery(ies) noted on page 5. Use only rechargeable battery(ies).

LDo not mix old and new batteries.

LDo not dispose of the battery(ies) in a fire, as they may explode. Check local waste management codes for special disposal instructions.

LDo not open or mutilate the battery(ies). Released electrolyte from the battery(ies) is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

LExercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns.

LCharge the battery(ies) in accordance with the information provided in these operating instructions.

6

Image 6
Contents Model No. KX-TG1840NZ Introduction Feature highlights Useful Information Accessory information Included accessoriesAdditional/replacement accessories General Battery cautionImportant information EnvironmentControls and displays ControlsDisplays Connections Base unit display iconsBattery installation Battery chargeBattery strength Battery icon Battery replacement Turning the power on/offSetting the date and time Example 330 PM Making calls using the handset Redial featureTo erase numbers in the redial list Other featuresVoice enhancer Handset phonebook Key lockPause button for PBX/long distance service users Making calls using the base unitButton to use the recall feature Recording a telephone conversation using the handsetTo adjust the speaker volume To redial the last number dialledAnswering calls using the handset Answering calls using the base unitCategories Handset phonebookAdding entries to the handset phonebook Finding and calling a handset phonebook entryOne touch dial Erasing entries from the handsetPhonebook Editing entries in the handset PhonebookMaking a call using a one touch dial key Chain dialErasing a one touch dial assignment Shared phonebook Adding entries to the shared phonebookFinding and calling a shared phonebook entry Changing a name, phone number, audible call Editing entries in the shared phonebookErasing entries from the shared phonebook Playing back an audible call announcementCopying handset phonebook entries to the shared phonebook Copying phonebook entriesCopying handset phonebook entries to other handset Copying one entryGuide to handset settings Handset settings Sub-menu Default setting MenuAlarm Time settingsRinger setup Ringer volumeTurning night mode on/off Night modeSetting the start and end time for night mode Setting the ring delay for night modeSelecting categories to bypass night mode Display setupSelecting the standby mode display Changing the display languageCall options Other optionsResetting the handset to its default settings Guide to base unit settings Base unit Sub-menu Default setting Settings menuNight mode Storing/changing emergency numbers Setting pause lengthChanging the recall time Selecting area codes to be deleted automaticallySetting call restriction Resetting the base unit to its default settings Changing the base unit PIN Personal Identification NumberUsing Caller ID service Category features for handset phonebookViewing the caller list and calling back Caller listAudible call for shared phonebook Editing a caller’s phone number before calling backCall minder Storing caller information into the handset phonebookAnswering system Greeting messageListening to messages Using a prerecorded greeting messageUsing the handset Playing back the greeting messageListening to new/all messages Erasing all messagesDirect command operation using the handset Calling back using the handset Caller ID subscribers onlyKey Direct commands Turning remote operation on/off Using the answering system remotelyRemote operation Voice guidanceAnswering Default System setting Setting Remote commandsKey Remote command Turning on the answering system remotelySelecting the caller’s recording time Turning call screening on/offTurning message alert on/off Answering System Features Additional handsets Operating additional unitsRegistering a handset to a base unit Additional base unitsCancelling a handset Selecting a base unitIncreasing the range of the base unit Cancelling a base unitIntercom Between a handset and the base unitBetween handsets From a handset to the base unitFrom the base unit to a handset Transferring a call without speaking to the handset user Wall mounting Screws Hook 108 mmAvailable character entries Character entry modesExtended 1 character table N Extended 2 character table OCyrillic character table P Troubleshooting Initial settingsProblem Cause & solution Telephone Redial the number manually Answering system Specifications Index PINIndex Customer Support Centre Tel. No 272 Sales Department Copyright