Elta 4518 manual Time Setting for Projection Unit

02-4518-EN.qxp 12/4/06 3:02 PM Page 18

2. The radio On mode, use the infrared sensor to turn sleep function on.

-Hand on top of sensor (6) within 2 seconds to turn the sleep on, the word "Slp" showing on the LED display. Sleep time from 10-90 minutes. (Refer to "Sleep function" for require sleep time adjustment). Press (9) to cancel sleep function.

3.The alarm on mode, use the infrared sensor to turn snooze function on.

- Hand on top of sensor (6) within 1 second snooze off for 9 mintues.

THE LED DIGITAL CLOCK AND THE PROJECTION

CLOCK MUST BE SET SEPARATELY.

TIME SETTING FOR PROJECTION UNIT

To preset the HOURS, press simultaneously the HOUR Button (25) an the TIME button (26). Keep them pressed until the hour digits to be preset are displayed.

To preset the MINUTES, press simultaneously the MINUTE button (24) and TIME button (26). Keep them pressed until the minute digits to be preset are displayed.

Focus setting : Ajust the projection clock brightness/focus by turning the brightness/focus adjustment wheel (27) until the projected time is clearly shown on the ceiling or wall.

NOTE:

PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.

MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.