Friedrich MW24Y3F To Stop Operation Press the START/STOP button Q, About Mode Operation

Page 7

To Stop Operation

Press the START/STOP button (Fig. 6 Q).

The OPERATION Indicator Lamp (red) (Fig. 3 5) will go out.

About AUTO CHANGEOVER Operation

AUTO: ● When AUTO CHANGEOVER operation first selected, the fan will oper- ate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode.

If the differance between thermostat setting and actual room tempera- ture is more than +4 °F → Cooling or dry operation

If the difference between thermostat setting and actual room tempera- ture is within ±4 °F → Monitor operation

If the difference between thermostat setting and actual room tempera- ture is more than –4 °F → Heating operation

●When the air conditioner has adjusted your room’s temperature to near the thermostat setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the room tem- perature subsequently changes, the air conditioner will once again select the appropriate operation (Heating, Cooling) to adjust the tem- perature to the value set in the thermostat.

(The monitor operation range is ±4 °F relative to the thermostat set- ting.)

●If the mode automatically selected by the unit is not what you wish, select one of the mode operation (HEAT, COOL, DRY, FAN).

About Mode Operation

Heating: ● Use to warm your room.

●When Heating mode is selected, the air conditioner will operate at very low fan speed for about 3 to 5 minutes, after which it will switch to the selected fan setting. This period of time is provided to allow the indoor unit to warm up before begin full operation.

●When the room temperature is very low, frost may form on the outside unit, and its performance may be reduced. In order to remove such frost, the unit will automatically enter the defrost cycle from time to time. During Automatic Defrosting operation, the OPERATION Indica- tor Lamp (Fig. 3 5) will flash, and the heat operation will be inter- rupted.

●After the start of heating operation, it takes some time before the room gets warmer.

Cooling: ● Use to cool your room.

Dry: ● Use for gently cooling while dehumidifying your room.

●You cannot heat the room during Dry mode.

●During Dry mode, the unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Also, the fan may operate at very low speed when adjusting room humidity.

●The fan speed cannot be changed manually when Dry mode has been selected.

Fan: ● Use to circulate the air throughout your room.

During Heating mode:

Set the thermostat to a temperature set- ting that is higher than the current room temperature. The Heating mode will not operate if the thermostat is set lower than the actual room temperature.

During Cooling/Dry mode:

Set the thermostat to a temperature set- ting that is lower than the current room temperature. The Cooling and Dry modes will not operate if the thermostat is set higher than the actual room temperature (in Cooling mode, the fan alone will oper- ate).

During Fan mode:

You can not use the unit to heat and cool your room.

En-6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Español Français English Operating ManualSafety Precautions ContentsInverter Features and FunctionsIndoor Unit Operating Control Panel Fig Manual Auto button Name of PartsPreparation Operation To Stop Operation Press the START/STOP button Q About Mode OperationAbout Auto Changeover Operation Timer Operation During Heating operation Sleep Timer OperationAbout the Sleep Timer Manual Auto OperationTypes of Air flow Direction Setting Adjusting the Direction of AIR CirculationAbout Swing Operation Swing OperationCoil DRY Operation To select Swing Operation Press the Swing button TCleaning and Care Function TroubleshootingSymptom Problem NormalAuto Restart Event of Power InterruptionOperating Tips Operation and PerformanceCooling Mode Dry Mode Heating Mode Outdoor temperature Temperature and Humidity RangeIndoor temperature Précautions DE Sécurité ’essayez pas d’installer vous-même ce climatiseurLe personnel de service compétent en cas de réparation SommaireInverseur Caractéristiques ET FonctionsManual Auto Nomenclature DES OrganesPréparatifs Réglage du thermostat Appuyez sur la touche SET TEMP. K Pour choisir le mode souhaitéFonctionnement Appuyez sur la touche Master Control JArrêt du climatiseur Appuyez sur la touche START/STOP Q Propos du mode de fonctionnementRêt OFF et la mise en marche on par minuterie Appuyez sur la touche Timer Mode N pourFonctionnement PAR Minuterie DE Programmation ’heure d’arrêt et de mise en marche souhaitéesPropos de la minuterie à temporisateur Fonctionnement TemporiséFonctionnement MANUEL-AUTOMATIQUE Changement des réglages du minuteriePositions de réglage de direction du flux d’air Réglage DE LA Direction DU Flux D’AIRPropos du séchage du serpentin Propos du mode oscillant SwingFonctionnement Oscillant Fonctionnement DU Séchage DU SerpentinRemettez la grille d’admission Nettoyage ET EntretienNettoyez la poussière avec un aspirateur ou en lavant Nettoyez à l’eauNormales Guide DE DépannageSymptôme Problème Voyez FonctionsEn cas de coupure de courant Conseils D’UTILISATIONFonctionnement et performance Remise en marche automatiqueTempérature intérieure Environ 64 à 90 F Plage de température et d’humiditéEnviron 5 à 75 F Precauciones DE Seguridad ÍndiceInversor Características Y FuncionesAutomática Sleep Pantalla de vaivén Swing Denominación DE LOS ComponentesPreparativos Para ajustar el termostato FuncionamientoPara seleccionar el modo de funcionamiento Trol J para seleccionar el modo deseadoNotas sobre el funcionamiento de los modos NotassobreelfuncionamientodecambioautomáticoAUTOCHANGEOVERFuncionamiento CON Temporizador Durante el funcionamiento de calefacción Funcionamiento Manual Y AutomáticoPara cambiar los ajustes del tiempo Notas sobre el temporizador de desconexión automática SleepTipos de ajustes de la dirección del flujo de aire Ajuste DE LA Dirección DE Circulación DEL AireObservaciones sobre el funcionamiento del vaivén Funcionamiento DE VaivénFuncionamiento DE Deshumectación Coil DRY Para detener el funcionamiento de deshumectación Coil DRYColocación de la rejilla de entrada Limpieza Y MantenimientoSaque el polvo con una aspiradora o la Vándolo Limpie con aguaLocalización DE Averías Síntoma Problema Vea la PáginaFunciones En el caso de una interrupción de la alimentación Consejos Para EL FuncionamientoFuncionamiento y rendimiento Reinicio automáticoTemperatura exterior Margen de temperatura y humedadModo de refrigeración Funcionamiento dePage

MW24Y3F specifications

The Friedrich MW24Y3F is a standout in the world of portable air conditioning units, designed for both residential and commercial applications. With its sleek design and advanced features, this model offers exceptional cooling capabilities while ensuring energy efficiency and user comfort.

One of the main features of the MW24Y3F is its powerful cooling capacity. With a BTU rating of 24,000, it is well-suited for larger rooms or open spaces, making it an ideal choice for users seeking effective temperature control without the noise and complexity of traditional central air conditioning systems. This unit can easily cool spaces of up to 1,500 square feet, providing a refreshing respite from sweltering heat.

The MW24Y3F employs cutting-edge technologies that enhance its performance and user experience. Notably, it incorporates inverter technology, allowing for more efficient energy consumption. By adjusting the compressor speed as per the cooling demand, it reduces energy usage while maintaining consistent temperatures. This translates to lower electricity bills and a reduced carbon footprint, making it an environmentally friendly choice.

Another significant characteristic is its user-friendly interface. The unit features a digital display and remote control, enabling users to adjust settings effortlessly from across the room. Additionally, the MW24Y3F includes a programmable timer, allowing for automatic operation based on the user’s schedule, further enhancing convenience.

The air conditioning unit also prioritizes air quality, integrating a multi-stage filtration system that captures dust, allergens, and other pollutants. This feature is particularly beneficial for those with respiratory issues or allergies, providing cleaner, healthier air in the living or work environment.

In terms of installation, the MW24Y3F is designed for flexibility. It can be set up as a window or portable unit, giving users options based on their property layout and personal preferences. Its compact size allows it to fit well in various spaces without compromising aesthetics.

In summary, the Friedrich MW24Y3F combines high cooling capacity, energy efficiency, user-friendly features, and air quality improvement technologies, making it an excellent choice for anyone looking to enhance their indoor climate control.
Top Page Image Contents