Friedrich YS09 How to use the remote control* QuietMaster Programmable, To set the hour clock

Page 5

920-198-01

How to use the remote control* (QuietMaster Programmable)

To start unit

1POWER - Press the Power button once. The unit will automatically turn on in the mode and fan speed it was last left on.

To set mode of operation

2COOL - Press the Cool button to automatically switch the operating mode to COOL.

3FAN ONLY - Press the Fan Only button if you want to run the fan only. You may want to use this feature in conjunction with the Fresh Air/ Exhaust if you want to bring outside air into the room, or exhaust stale air. (The FRESH AIR / EXHAUST feature is located on the front of the air conditioner near the top. See Figure 9 on page 7.)

4MoneySaver® - Press the MoneySaver® button to activate the MoneySaver® feature. This cycles the fan with the compressor so that the fan does not run all the time.

To adjust temperature

To set the timer

NOTE: Set the hour clock before attempting to set timer functions. You can set the timer On/Off a minimum of one hour apart, and a maximum of 23 hours apart.

9TIMER START - Press Start to view the current start time for cool- ing. Continue pressing the Start button until you arrive at the start time you desire. The start time for cooling will then be set.

10TIMER STOP - Press the Stop button. Continue pressing the Stop button until you arrive at the stop time you desire. The stop time for cooling will then be set.

11TIMER ON/OFF - Press the On/off button once to activate (light on) or deactivate (light off) the timer. Once the Start and Stop times have been selected, they will remain in memory, and cycle daily until changed.

NOTE: If the unit is unplugged or the power is interrupted, the HOUR CLOCK must be reset or the Timer On/off functions will not work.

5COOLER - Press the Cooler button to raise the temperature setting.

6WARMER - Press the Warmer button to lower the temperature setting.

To adjust fan speed

7FAN SPEED - Press the Fan Speed button to see the current set- ting. Press again to change the fan speed. F1 is the lowest setting (SLEEP SETTING), F2 is low speed (LOW), F3 is medium (MED), and F4 is high (HIGH).

To set the hour clock

8SET HOUR CLOCK - Press SetHouronce to see the current clock set- ting. Continue pressing the button until you arrive at the current time.

MAKE SURE YOU SET THE A.M. AND P.M. PROPERLY. (NOTE: MINUTES ARE NOT SHOWN ON THE DISPLAY.) A light will appear in the upper left corner of the display when the hour is P.M.

* A Friedrich RC1 wireless remote control can be used to operate all QuietMaster® Programmable models.

Figure 4

 

 

 

 

Temperature

 

 

 

Cooler

 

Warmer

 

6

 

 

 

5

Cool

 

 

Power

1

2

 

 

 

 

 

Fan

Fan

 

Money

4

3

 

 

 

Only

Speed

Saver®

 

Timer Operation

 

 

7

On/Off

Start

Stop

Set Hr.

 

11

 

 

 

8

9

 

 

 

10

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Volt YS09 Standard Chassis ModelsVolt KS12, KS15 Congratulations Table of contentsTest the power cord Make sure the wiring is adequate for your unitKeep the filter clean Unit placementTo adjust fan speed To set mode of operationTo set the timer To start unitTo set the hour clock How to use the remote control* QuietMaster ProgrammableTo adjust temperature To set the timer Mode control QuietMaster ‘K’ How to operate your Friedrich room air conditionerMode control Twintemp Temperature controlTo remove, wash and replace filter and return air grille Care and Maintenance / Fresh air and exhaust controlFresh air and exhaust control Model Designation Installation InstructionsRead This First! Electrical Requirements Description QTY Window Mount Thru-the-wall Installation HardwareFoam Blocks Used to Restrain the Compressor StepFalling Object Hazard Figure C Typical Mounting Scheme Section a a Figure J Model Through-the-wall InstallationsDetail Brick Veneer Construction Finished Small Medium Large Dimension ChassisFrame Wall Construction Solid Masonry ConstructionFigure F Typical Installation Available Accessories Troubleshooting tipsRoom AIR Conditioners Limited Warranty Contenido ¡EnhorabuenaNo utilice un alargador Asegúrese de que los cables sean apropiadosPruebe el cable Mantenga limpio el filtroPuesta en marcha Configuración del modo de funcionamientoPara ajustar la velocidad del ventilador Para activar el ventilador inteligente Smart FanTemporizador Para ajustar la temperaturaControl de la temperatura Control de los modos TwintempInterruptor Money Saver Control de los modos QuietMaster ‘K’ y Heavy DutyAire fresco y control de la ventilación FiltroModelo Instrucciones de instalación¡Lea esto primero! Requisitos de electricidad Artículo Descripción Cantidad Material de instalación en ventanaMaterial de instalación de pared Detalle B-1 Instalación estándar del marco de la ventanaDetalle B-2 Peligro de caída de objetosAviso Soporte Invertidos Figura 1A Esquema DE UNA Instalación TípicaFigura G Paso 12 Instale LAS Juntas Selladoras DE LA VentanaFigura J Mampostería, ladrillo, cemento o paredes de ladrillo gris Instalación de paredAntes DespuésInstalación EN Ladrillo Instalación DE Pared CON MarcoInstalación DE Mampostería Medidas Chasis Pequeño Mediano GrandeFigura F Instalación Típica ¿No enfría? Fallo de la corriente¿No funciona? Es una unidad para climas templadosDEL Segundo AL Quinto AÑO EL Primer AÑOTable des matières FélicitationsAvertissement Avant de faire fonctionner votre unité Pour mettre l’unité en marche Pour régler le mode de fonctionnementPour régler la vitesse du ventilateur Pour activer Smart FanPour régler la température Comment utiliser la télécommande* QuietMaster programmableProtection automatique des composants Contrôle des modes Twintemp Contrôle des modes QuietMaster « K » et robusteContrôle de la température Interrupteur Money SaverContrôle de l’air frais et de l’échappement FiltreLisez ceci d’abord ! Exigences électriques Directives d’installationDésignation DE Modèle Taille DU Caisson Haut x Larg x ProfQuincaillerie d’installation Pour montage dans une fenêtre Détail B-2 Installations dans une fenêtre à guillotine standardRemarque A Plan DE Montage Typique Étape 12 Installez LES Joints D’ÉTANCHÉITÉ DE LA Fenêtre Étape 11 Installez LES Panneaux Latéraux DE LA PlanchePlénum D’AIR Remarque Détail Installations encastrées dans le murDirectives Spéciales Pour Murs Très Épais Pour Construction À Ossature EN Bois Dimension Petit Moyen Grand Finie ChâssisConstruction À Placage EN Brique Construction À Maçonnerie PleineBoulon D’ANCRAGE Extension Boulon À Ailettes Figure F Installation TypiqueConseils de dépannage Accessoires offertsClimatiseurs DE Fenêtre Garantie Limitée 920-198-01

YS09 specifications

The Friedrich YS09 is an impressive model in the world of modern technology, showcasing advanced features and design tailored for efficiency and performance. This device has become increasingly popular among users looking for a powerful yet compact option for various tasks.

One of the standout characteristics of the YS09 is its robust processing power. Equipped with a next-generation processor, it ensures smooth multitasking capabilities, making it ideal for demanding applications. Users can run multiple programs simultaneously without experiencing any lag, a feature that significantly enhances productivity.

In terms of display, the YS09 boasts a high-definition screen that offers vibrant colors and sharp image quality. The display technology employed provides excellent viewing angles and reduces glare, making it perfect for both indoor and outdoor use. Furthermore, the touchscreen interface adds an extra layer of convenience, allowing for intuitive navigation and interaction.

The YS09 is also designed with connectivity in mind. It comes with a wide range of ports, including USB-C, HDMI, and traditional USB ports, facilitating seamless integration with other devices and accessories. This versatility ensures that users can connect peripherals like external hard drives, monitors, and other devices without hassle.

Battery life is another crucial aspect where the YS09 excels. With an efficient power management system, the device can last several hours on a single charge, making it suitable for users who are often on the go. This long-lasting performance is complemented by fast charging capabilities, ensuring minimal downtime.

Incorporating the latest security technology, the YS09 includes biometric authentication options, such as fingerprint recognition. This feature not only enhances security but also streamlines the login process, allowing users to access their devices quickly and safely.

Lastly, the build quality of the YS09 does not disappoint. Its sleek and durable design is both aesthetically pleasing and practical, with materials chosen for their resilience and lightweight properties. This balance of form and function makes it an attractive choice for professionals and casual users alike.

In summary, the Friedrich YS09 is a remarkable device that integrates powerful performance, advanced technologies, and user-friendly features, catering to the diverse needs of today’s dynamic digital environment.
Top Page Image Contents