Xantrex Technology XC3012, XC5012, XC2524 manual XC Series provides the following standard features

Introduction

Xantrex XC3012, XC5012, XC1524 and XC2524 Battery Charger Features

The XC Series provides the following standard features:

•three full current rated, independently controlled outputs which enable it to charge three different batteries or battery banks. Each bank can be of a different battery type, stage of charging, and temperature compensation

•one battery temperature sensor (BTS) is included. Optional BTSs may be purchased for the other two outputs, to provide complete optimal battery charging to each battery or bank

•battery monitoring functions while in float mode or rest mode

•correct charging voltage for your batteries when connected to almost any single phase AC power outlet in the world

•invertable remote display panel which can also be removed from the charger and mounted up to 20 m (65 ft) away for remote control and monitoring

The XC Series provides the following protection features:

•true “fuseless” reverse polarity protection to guard against continuous reverse battery polarity without charger damage

•AC over voltage protection shutdown

•over temperature protection shutdown

•electronic current limiting for protection against short circuit on the unit’s output

•built-in protection against accidental connection to a higher battery voltage, up to 24 VDC

•battery temperature compensation to 0 °C (32 °F) (with BTS installed)

•ignition protected rating, enabling installation in engine spaces

•isolated design to reduce shock hazard

•automatic charge resumption after AC power interruption

1–2 975-0187-01-01