Xantrex Technology XC2524, XC5012, XC3012, XC1524 manual Information Centers of the XC Series

Information Centers of the XC Series

Item Description

3Alpha-numeric display shows

•Configuration

•Fault or warning messages (see Table 4-2 on page 4–4)

•Battery bank voltage and current

•Type of charging (2 stage or 3 stage)

•State of charge

4Units indicator lights

•Illuminate to show unit of measure for the numeric read-out on the alpha-numeric display

5BANK selection push button

•Press to select a bank during setup

•Press at the same time as MODE to enter or exit equalization mode.

6TYPE selection push button

•Press to select flooded (lead acid), gel, AGM, or lead calcium batteries.

7MODE selection push button

•Press to select charging state during setup: 2 stage or 3 stage.

•Press at the same time as BANK to enter or exit equalization mode.

•Press and hold to enter setup.

The indicator lights and display are also used to indicate error codes. See Chapter 4, “Troubleshooting” for a list of faults and how to clear them.

975-0187-01-01 1–5