Hitachi C 10FS instruction manual Accessories, Applications

English

Miter sawing range	Left 0° – 45° Right 0° – 45°
Bevel sawing range	Left 0° – 45° Right 0° – 45°
Compound sawing range	Left (Bevel) 0° – 45°, Left and Right (Miter) 0° – 45°
	Right (Bevel) 0° – 45°, Left (Miter) 0° – 31°, Right (Miter) 0° – 45°
Net weight	44lbs. (20kg)
Cord	2 Conductor type cable 6.5ft. (1.99m)

*When slide fence assembly is used.

When cutting the workpiece which has the dimension of “*1” there might be some possibility of the lower end of the circular saw to touch with the workpiece, even if the motor head is located at the lower limit position. Pay attention when cutting the workpiece. For further details, refer to “PRACTICAL APPLICATIONS” on page 15.

ACCESSORIES

WARNING: Accessories for this power tool are mentioned in this Instruction Manual.

The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

STANDARD ACCESSORIES

q10" (255mm) TCT Saw blade (1 piece)

(No. of teeth 40 Code No. 310878A)

w Dust bag (1 piece)	r Vise Assembly w/knob
	bolt (1 piece)

For how to use, refer to	For how to use, refer to page
page 23.
	16.
e Slide Fence Assembly	t 10mm BOX
	wrench (1 piece)

For how to use, refer to page 16.

Fig. 3

OPTIONAL ACCESSORIES...sold separately

qExtension Holder and Stopper (Fig. 1) (Code No. 998866)

wSaw blade 10" (255mm) TCT Saw blade (Total teeth: 72) (Code No. 725206)

eVise (A) Assembly (Code No. 308394)

NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

APPLICATIONS

Wood and aluminum sash.

10