Systainer
Many Festool products are shipped in a unique system container, called "Systainer". This provides protection and storage for the tool and accessories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors.
15.3 |
15.2 |
15.1 |
-Place one systainer on top of the other.
-Release all four latches on the lower systainer by pulling back at their top edges (15.1).
-Slide all four latches upward (15.2).
-Snap all four latches back to their flat position (15.3) so they engage the stacking tabs of the upper systainer.
Servicing and maintenance
Any maintenance or repair work that requires opening of the motor or gear housing should only be carried out by an authorised Customer Service Centre (name supplied by your dealer) ! Maintenance or repair work carried out by an unauthorised person can lead to the wrong connection of the power leads or other components, which in turn can lead to accidents with serious consequences.
To prevent accidents, always remove the plug from the power supply socket before carrying out any maintenance or repair work on the machine! Do not use compressed air to clean the electrical tool! Do not try to clean parts inside the machine in this way, as you could let foreign objects in through the openings of the machine housing.
Certain cleaning agents and solvents are harmful to plastic parts. Some of these are: gasoline, carbonyl chloride, cleaning solutions containing chlorine, ammonia and household cleaners containing ammonia.
•To assure the circulation of air, the cool air vents in the motor housing must always be kept clear and clean.
•This unit is fitted with special, automatically disconnecting carbon brushes. If these become worn, the current is automatically switched off and the unit shuts down. In this case, take the unit to an authorised Customer Service Centre and have the carbon brushes changed.
•After being removed away from the workpiece, the machine automatically returns to its basic position, the saw blade retracts into the protective cover and the
•The riving knife must be aligned with the saw blade, and should not be crooked. A faulty riving knife must be replaced immediately. Under no circumstances use the saw without the riving knife because of the increased risk of recoil.
•Even with proper usage the teeth of the saw blade become blunt in time. Change the saw blade as soon as you notice that you need a greater force to push the machine during sawing or the quality of cut has deteriorated. Take blunt saw blades back to an authorised Customer Service Centre for
Accessories
The order numbers for these and for other accessories that allow you to use your Festool portable circular saw effectively and in many ways, can be found in the Festool catalogue or on the
Internet under
Parallel stop, table widener
A parallel stop can be used for section widths up to 180 mm.
The parallel stop can also be used as a table widener.
Side-mounted cover, false joints
The cover that can be mounted on the side of the protective cover improves the effect of dust extraction for 0° cuts.
Simultaneously, the cover can be used as a false joint stop for false joint widths from 18 mm onwards.
10