Delta DP300L instruction manual Screw front laser housing a to the rear

EYE INJURY - LASER LIGHT. DO NOT STARE INTO THE LASER BEAM OR APERTURE OR INTO A REFLECTION FROM A

MIRROR-LIKE SURFACE.

12. Screw front laser housing (A) Fig. 14 to the rear

laser housing (B) loosely using the two socket head

cap screws (C) Fig. 14A inset included in laser

B

	packaging.
13.	Place this laser housing assembly onto the drill
	press column (D) Fig. 14A and rest it on the collar
	(E) Fig. 14A.
14.	Tighten the screws (C) Fig. 14A inset, making sure
	the laser housing is positioned so that one laser is
	to each side of the column (D), as shown in Fig 14A.
15.	Remove battery cover (F) Fig. 14B from laser
	housing.
16.	Connect a 9-volt battery (G) (not included) onto the
	battery terminal (H).
17.	Place battery into the compartment (I) and replace
	the cover.

A

C

D

Fig. 14

E

Fig. 14A

H

I

G

F

Fig. 14B

12