Delta DP300L instruction manual Carton Contents

CARTON CONTENTS

1

13

12 11 10

2 3

4

9 8 7 6 5

1.Drill Press Head and Motor

2.Table

3.Column, Base Flange and Rack

4.Base

5.M8x1.25x25mm Hex Head Cap Screws (4)

6.Worm Gear for Table Raising and Lowering

7.Hex Wrenches (2)

8.Pinion Shaft Handles (3)

9.M8x1.25x125mm Carriage Head Screws (2), M8 Flat Washers (2), M8.1 Lock Washers (2), M8x1.25 Hex Nuts (2) (for fastening the base to a supporting surface)

14 15 16

10.Chuck Key

11.Table Raising and Lowering Handle

12.Table Clamp

13.Chuck

14.Clamp

15.Mounting bracket

16.Tray

17.Mounting arm

18.Laser

19.Laser Alignment Rod

20.Hex Head Cap Screws (2)

18

19

17

20

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

DO NOT USE HIGHLY VOLATILE SOLVENTS SUCH AS GASOLINE, NAPHTHA, ACETONE OR LACQUER THINNER FOR CLEANING YOUR MACHINE.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

9