Delta 37-071 Product Specifications, Unpacking, Description Quantity, Contents Hardware Pack

PRODUCT SPECIFICATIONS

Weight	76 lbs
Overall Dimensions (L x W x H)	26 x 8 x 10 in.
Table Dimensions (L x W)	28-1/2 in. x 6-¼ in.
	12 amps
Motor	120V
	Single-Phase
	60 Hz
Maximum Width of Cut	6 in.
Maximum Depth of Cut	1/8 in.
Number of Knives	2
Cuts per Minute	20,000
Fence Length	22-7/8 in.
Fence Height	4-5/16 in.
Fence Angle	45°, 90° and 135°
Cutterhead Diameter	1-7/8 in.
Cutterhead Speed	10,000 RPM

UNPACKING

Compare all parts to the list below and check that all parts are present and in good condition. Report any missing or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual thoroughly to familiarize yourself with proper assembly, maintenance and safety procedures.

DESCRIPTION (QUANTITY)

1.37-071 6” Jointer (1)

2.Fence

3.Rear Fence Support (1)

4.Rear Fence Bracket (1)

5.Dovetail Clamp (1)

6.Indexing Handle (1)

7.Fence Mounting Plate (1)

8.Fence Angle Lock (1)

9.45°/90° Angle Stop (1)

10.Hardware Package (1)

11.4 mm Hex Wrench (1)

12.6 mm Hex Wrench (1)

13.Push Blocks (2)

14.Dust Chute (1)

15.Operator’s Manual (not shown)

CONTENTS OF

HARDWARE PACK

•M8 x 16mm Hex Head Screws (4)

•M8 x 20mm Hex Head Screws (2)

•8mm Lock Washers (6)

8