Delta 22-555 Product Specifications, Unpacking, Description Quantity, Hardware Package

PRODUCT SPECIFICATIONS

Cuts Per Minute	18,800
Feed Rate	28ft./min.
Max. Cut Depth (per pass)	3/32”
Max. Cutting Width	12- ½ “
Max. Cutting Height	6”
Cutterhead Speed	9,400 RPM
Tool Dimensions (LxWxH)	21-5/8” x 23-5/8” x 20-1/8”
Motor	15 Amp, 120V
Net Weight	58 lbs
Knife Type	Double-edge reversible
Number of Knives	2
Knife Size (L x W x T)	320mm x12mm x1.5mm

UNPACKING

Compare all parts to the list below and check that all parts are present and in good condition. Report any missing or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual thoroughly to familiarize yourself with proper assembly, maintenance and safety procedures.

DESCRIPTION (QUANTITY)

1.	DELTA® Model #22-555 Planer (1)	1	2
2.	Height Adjustment Handle (1)
3.	Reversible 2” Dust Port (1)
4.	Knife Transfer Tool (2)
5.	T-wrench (not shown)

HARDWARE PACKAGE

•4mm T-handle Hex Wrench

•M5x16mm Hex Head Screw (1)

•M5 Flat Washer

•M6x15mm Lock Knob (2)

3

4

Remove any protective materials and coatings from all of the parts and the tool. The protective coatings can be removed by spraying WD-40 on them and wiping it off with a soft cloth. This may need redone several times before all of the protective coatings are removed completely.

If any parts are missing, do not attempt to plug in the power cord and turn “ON” the machine. The machine should only be turned “ON” after all the parts have been obtained and installed correctly.

8