DeWalt DWE4011 instruction manual Personal Safety, Power Tool USE and Care, Service

Page 4

English

3)PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

2

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Guide D’UTILISATION Manual DE Instrucciones Page Definitions Safety Guidelines General Power Tool Safety WarningsWork Area Safety Electrical SafetyPower Tool USE and Care Personal SafetyService Safety Instructions for ALL Operations Causes and Operator Prevention of Kickback Safety Warnings Specific for Sanding Operations Safety Warnings Specific for Wire Brushing Operations Safety Warnings Specific for Polishing OperationsAdditional Safety Rules for Grinders Motor Save These Instructions for Future USEComponents Fig Rotating the Gear Case Fig Assembly and AdjustmentsIntended USE Mounting Guard Accessories and Attachments 2 114.3 mm Grinding Wheels Wire WheelsMounting and Removing Type 27 ONE-TOUCHGUARD Operation SwitchesGuards and Flanges Spindle Lock FIG Mounting and Removing Hubbed WheelsMounting NON-HUBBED Wheels FIG WheelsSurface Grinding with Grinding Wheels FIG Edge Grinding with Grinding Wheels FIGSurface Finishing with Sanding Flap Discs FIG Mounting Sanding Backing Pads FIGUsing Sanding Backing Pads FIG Mounting and Using Wire Brushes and Wire WheelsMounting Wire CUP Brushes and Wire Wheels Using Wire CUP Brushes and Wire Wheels Mounting and Using Cutting Type 1 WheelsMounting Closed Type 1 Guard Maintenance CleaningUsing Cutting Wheels FIG Mounting Cutting WheelsAccessories Repairs Three Year Limited WarrantyYear Free Service DAY Money Back GuaranteeSécurité DU Lieu DE Travail Définitions lignes directrices en Matière de sécuritéSécurité EN Matière D’ÉLECTRICITÉ Sécurité Personnelle Utilisation ET Entretien D’UN Outil Électrique Consignes DE Sécurité Pour Toutes LES OpérationsRéparation Français Causes de l’effet de rebond et prévention par l’opérateur Français Règles additionnelles de sécurité propres aux meuleuses Calibres minimaux des rallonges Volts Moteur Conserver CES Consignes Pour Utilisation UltérieureDescription Fig Assemblage ET Réglages Rotation du carter d’engrenage FigFixation DE LA Poignée Latérale FIG Usage PrévuAccessoires et raccords Instalación del protectorPonçage Fonctionnement Dispositifs de protection et bridesInterrupteur À Glissière FIG InterrupteursMontage ET Démontage DE Meules À Moyeu Montage DE Meules Sans Moyeu FIG Meulage DE Finition Avec DES Meules FIGMeulage DE Bordure Avec DES Meules FIG Montage DES Patins D’APPUI ET DE Ponçage FIGUtilisation DES Patins DE Ponçage ET D’APPUI FIG Montage et utilisation de meules de coupe type Montage D’UN Dispositif DE Protection Fermé Type 1 Montage DE Meules DE CoupeAccessoires NettoyageRéparations Utilisation DES Meules DE Coupe FIGContrat D’ENTRETIEN Gratuit D’UN AN Garantie limitée de trois ansGarantie DE Remboursement DE 90 Jours Seguridad EN EL Área DE Trabajo Definiciones Normas de seguridadSeguridad Eléctrica Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaInstrucciones DE Seguridad Para Todas LAS Operaciones MantenimientoEspañol Causas del retroceso y su prevención por parte del operador Español Normas de seguridad adicionales para esmeriladoras Calibre mínimo para juegos de cables Capacidad Voltios Componentes Fig Guarde Estas Instrucciones Para Futuras ConsultasEnsamblado Y Ajustes Rotación de la caja de engranajes FigAccesorios y dispositivos USO DebidoMontaje Y Extracción DEL Protector ONE-TOUCH Tipo 27De liberación del protector Funcionamiento Protectores y bridasInterruptores Interruptor Deslizador FIGEnsamblado DE Discos SIN Cubo FIG Bloqueo DEL EJE FIGMontaje Y Remoción DE Discos CON Cubo Discos DE 1/4Esmerilado DE Superficies CON Discos Para Esmerilar FIG Esmerilado DE Bordes CON Discos Para Esmerilar FIGMontaje DE LAS Almohadillas DE Respaldo Para Lijar FIG Acabado DE Superficies CON Discos Para Lijar FIGUSO DE Almohadillas DE Respaldo Para Lijar FIG Montaje y uso de cepillos de alambre y discos de alambre Montaje y uso de los discos de corte Tipo Montaje DEL Protector Cerrado Tipo 1Mantenimiento LimpiezaAccesorios Montaje DE LOS Discos DE CortePóliza de Garantía ReparacionesPara Otras Localidades Garantía limitada por tres años ExcepcionesAÑO DE Servicio Gratuito Garantía DE Reembolso DE SU Dinero POR 90 DíasEspecificaciones DWE4011
Top Page Image Contents