Husqvarna FS 700 EX manual What is what

Page 8

Operator’s Manual FS 700EX

What is what

21

5

11

13

 

 

7

6

 

11

9

 

 

10

 

8

 

 

34

12

10

1.Trolley feed lever

The machine's propulsion is controlled using this lever. The machine is driven forwards by turning the lever clockwise. When the lever is turned anticlockwise, the machine reverses. When lever is in the neutral position the machine stands still. This function works as soon as the machine is connected to the power and the machine's propulsion is engaged.

2.Blade feed lever

This lever is used to raise and lower the cutting bridge. The blade is fed downwards when the lever is turned anticlockwise. When the required cutting depth is achieved the lever is turned to the neutral position. The blade is raised by turning the lever clockwise. This function works as soon as the machine is connected to the power.

3.Water selector

Turn this knob anticlockwise to open the water valve. Water is led through the blade spindle and out to the blade flange, where the water cools the blade and prevents dust build-up.

4.Start knob

Used to start the blade.

5.Emergency stop

Cuts all power to the machine. No functions can be activated until the emergency stop has been reset. The emergency stop is reset by pulling out the button.

6.Power supply

For connecting an electrical connector of the type: 5-way 400 V/16A

4-way 480V/16 A.

4-way 600V/16A

7.Water connector

Water coolant is connected to the machine here.

8.1-Phase 230V outlet Socket

To connect a 230V tool to the machine.

9.Personel protection

Will cut the power to the 1-phase outlet socket at 30 mA earth fault.

10.Propulsion/Parking brake

When the foot lever is in the illustrated position the drive is engaged. When the foot lever is in this position

8 - English

Image 8
Contents Operator´s manual p.3 Bedienungsanweisung pGebruiksaanwijzing p Istruzioni per l’uso pPage Contents EnglishOperator’s Manual Key to symbols Manual Protective equipment Electrical WarningSafety Instructions Introduction What is what Handle setting Adjuster screwHose holder Blade guardTechnical data Weight excl. blade 155 kgAssembling/Replacing the blade OperationBefore cutting Connecting the machine Sawing Stop cutting Transport Maintenance Trouble shooting Fault Cause ActionEnglish EU declaration of conformity Operator’s Manual FS 700EX Deutsch InhaltBedienungsanleitung FS 700EX Erklärung der Symbole Sicherheitsvorschriften WarnungEinleitung Was ist was? Schlauchhalter TrennscheibenschutzSpritzschutz TrennscheibenflanschTechnische Daten AchtungEinbau/Austausch der Trennscheibe BedienungVor dem Sägen Maschine anschließen Schneiden Schneiden beenden Transport Wartung Fehlersuche Fehler Ursache MaßnahmeDeutsch Bedienungsanleitung FS 700EX EU-Erklärung Inhoudsopgave InhoudsopgaveInhoudsopgave Verklaring van de symbolen Gebruiksaanwijzing FS 700EX Veiligheidsinstructies WaarschuwingGebruiksaanwijzing FS 700EX Inleiding Gebruiksaanwijzing FS 700EX Wat is wat Handgreepinstelling SlanghouderSchijfbeschermer SpatbeschermingTechnische gegevens Gewicht excl. schijf 155 kg Gewicht incl. schijf 150 kgGebruiksaanwijzing FS 700EX Monteren/Vervangen van schijf GebruikVoor het zagen De machine aansluiten Zagen Zagen beëindigen Transport Onderhoud Opsporen van storingen LET OPBedienungsanleitung FS 700EX EU-verklaring Bedienungsanleitung FS 700EX Contenuto ContenutoContenuto Manuale Dispositivi di protezione individualeAvvertenza AttenzioneDisposizioni di sicurezza AvvertenzaIntroduzione Identificazione delle parti Portaflessibili Protezione del discoParaspruzzi Flangia del discoDati tecnici Peso escl. disco 155 kg Peso incl. disco 150 kgMontaggio/sostituzione del disco FunzionamentoPrima del taglio Collegamento della macchina Taglio Conclusione del taglio Trasporto Manutenzione Ricerca dei guasti Difetto Causa InterventoItaliano Dichiarazione di conformità CE Istruzioni per l’uso FS 700EX 115 04 2006-12-14