•MCS-200 unit (dual-rack configuration)
For successful site preparation, consider the following information:
•To provide dedicated cooling for servers and other IT equipment, the MCS-200/100 integrates with the facility chilled water plant or a dedicated chilled water loop. HP recommends that you install a dedicated cooling loop to the MCS-200/100.
•The system provides cooling, recirculation, and condensation management, and it requires a small amount of AC electric power.
•Internal monitoring and control sensors assure server inlet air set points to be achieved and provide constant performance feedback through local and network interfaces.
Product overview
The MCS-200/100 is a modular, distributed cooling solution that removes the high levels of heat generated by current advanced server and mass storage systems. The MCS-200/100 provides a uniform, effective, affordable, and distributed cooling approach for servers and other IT equipment installed in server racks. The MCS-200/100 is a closed-loop cooling system integrated as part of a non-ventilated server enclosure, in contrast to a conventional ”open” server enclosure with perforated front and rear doors.
Overview 8
