Table 2 Ultrium Tape Drive Capacity and Data Transfer Rate
| Drive Model | Data Capacity | Sustained Data Transfer Rate | |||
| Ultrium 460 | 200 GB (native) | 30 | MB/sec (216 GB/hour) | ||
|
| 400 | GB (compressed) | 60 | MB/sec (432 GB/hour) | |
|
|
|
|
|
|
|
| Ultrium 960 | 400 | GB (native) | 80 | MB/sec (576 GB/hour) | |
|
| 800 | GB (compressed) | 160 MB/sec (1152 GB/hour) | ||
|
|
|
|
|
| |
| Ultrium 1840 | 800 | GB (native) | 120 MB/sec (864 GB/hour) | ||
|
| 1600 GB (compressed) | 240 MB/sec (1728 GB/hour) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: Compressed capacity assumes a 2:1 compression ratio.
Ultrium Tape Cartridges
NOTE: In addition to the information provided in this manual, refer to the documentation provided with your media for more information. Also see ”Maintaining Tape Cartridges” on page 92.
CAUTION: HP Ultrium tape drives require special cleaning cartridges and data cartridges formatted specifically for HP Ultrium. To avoid damage to your tape drive, it is critical to use appropriate cleaning cartridges, and properly formatted data cartridges.
Approved media will have the Ultrium format trademark which indicates that the media has passed Ultrium format compliance testing (see Figure 2 for an example of the Ultrium 3 format trademark).
Figure 2 HP Ultrium 960 format trademark
For best results, always use HP branded media. For data and cleaning cartridges for your tape library, see www.hp.com/go/media
CAUTION: Do not bulk erase Ultrium formatted cartridges. This will destroy
18 Introduction