HP MSL6000 manual Sdlt Labels, Proper Ultrium bar code label placement

To ensure successful operation of your tape library, place the bar code label entirely within the recessed area, ensuring that no part of the label is outside of it (see Figure 63).

Figure 63 Proper Ultrium bar code label placement

SDLT Labels

SDLT tape cartridges have a front slide slot located on the face of the cartridge next to the write-protect switch (see Figure 64 shows) Use this slot for inserting the bar code label by sliding it into the slot.

CAUTION: Do not apply labels onto the top, bottom, sides, or back of the cartridge as this may cause damage to the tape drive, or interfere with reliable operation.

MSL6000 series tape library user guide 77