Table 6 View SCSI Options (continued)
Option | Description |
TapeAlert Mode | Specifies conditions for logging and reporting the |
| following Tape Alert data options. The default is |
| Unconditionally Generate Recovered Error. |
| • Logging Disabled: Inhibits the logging |
| feature. |
| • No Exceptions: The library must not report |
| information exceptions. |
| • Generate Unit Attention: Reports |
| information exceptions with a Unit Attention |
| sense key and an ASC/ASCQ of 5D/00. |
| • Conditionally Generate Recovered Error: |
| Reports information exceptions with a |
| Recovered Error sense key and an |
| ASC/ASCQ of 5D/00, if Recovered Error |
| Reporting is enabled. |
| • Unconditionally Generate Recovered |
| Error: Unconditionally reports information |
| exceptions with a Recovered Error sense key |
| and an ASC/ASCQ of 5D/00. |
| • Generate No Sense: Reports information |
| exceptions with a No Sense sense key and an |
| ASC/ASCQ of 5D/00. |
| • Report on Unsolicited Request Sense: |
| Reports information exceptions with a No |
| Sense sense key and an ASC/ASCQ of |
| 5D/00, only in response to an unsolicited |
| REQUEST SENSE command. |
|
|
Abort Move Status | Lets you specify the SCSI response while aborting a SCSI |
| command. The possible settings are Busy or Not Ready. |
| The default is Not Ready. |
|
|
Door Open Response | Lets you specify the SCSI response when a library door is |
| open. The settings are Ready or Not Ready. The default is |
| Not Ready. |
|
|
Initiate Wide Data | Lets you enable the library to initiate a SCSI synchronous |
Transfer Negotiation | and wide data transfer negotiation with the host. The |
| settings are Do Not Initiate or Initiate. The default is Do |
| Not Initiate. |
|
|