HP MSL6000 Library Configuration, Changing Default Configuration Settings, Setting a Scsi ID

3 Library Configuration

This chapter explains how to configure an HP StorageWorks MSL Series tape library for normal operation. Sections in this chapter include:

•Changing Default Configuration Settings, page 39

•Setting a SCSI ID, page 39

•Setting Up a Reserved Slot, page 41

•Configuring the Network Settings, page 47

Changing Default Configuration Settings

For most applications, you do not have to change the default settings; however, if you do need to change a configuration setting, use the procedures provided in the following sections. If you are uncertain whether you need to change a setting, contact your authorized service provider.

Configuration settings that might need to be changed include:

•Setting a SCSI ID, page 39

•Setting Up a Reserved Slot, page 41t

•Configuring the Network Settings, page 47

Change configuration settings using the graphical user interface (GUI) touch screen. For a complete description of how the GUI touch screen works, see Chapter 4, ”Operation” on page 49.

Setting a SCSI ID

Each tape drive installed in the library requires a unique SCSI ID. The information provided in this section shows you how to set a SCSI ID.

To set a SCSI ID:

1.Turn the library on and wait until the Power-On Self Test (POST) concludes and the Status screen is displayed.

2.Select the Menu option.

3.Select SCSI in the Edit Options area to display the following screen.

MSL6000 series tape library user guide 39