HP MSL6000 manual Inserting and Removing Tape Cartridges, Factory, Security Level

NOTE: The Vertical Calibration button is only available on four-drive models.

Factory

The Factory menu options are intended for use by factory personnel only.

CAUTION: Unauthorized use of the Factory option could render the library inoperable.

Security Level

Selecting this option lets you select passwords for a security level (see Figure 58).

NOTE: The library ships with a default Service password of 5566.

NOTE: Setting a value 0000 for a given level disables that level.

Figure 58 Security level screen

Inserting and Removing Tape Cartridges

Unless you are using the mail slot(s), a tape magazine must be removed from the library to remove or insert tape cartridges. Make sure the slot you want to use is not already reserved for a tape cartridge or cleaning cartridge that is now in a tape drive. The safest way to do this is to unload all tape drives before removing a magazine. You can unload all the tape drives either through your host system software or by using the LOAD/UNLOAD command from the Library Option menu.

72 Operation