NOTE: You can remove the appliqué from the GUI touch screen by catching one corner and carefully lifting it.
3.Wait for power to come on and graphical user interface (GUI) touch screen Z to activate the display.
1
Figure 17 Applying power to the library (four-drive rackmounted library shown)
Cabling for SCSI Configurations
This section describes supported SCSI cable configurations for the library.
The following SCSI configurations are detailed in this section:
•Two tape drives, dual host system (MSL6030/MSL6026)
•Four tape drives, dual host system (MSL6060/MSL6052)
NOTE: MSL Series libraries support SCSI cable configuration for one to four hosts and one to four tape drives. Contact your authorized reseller for a list of supported configurations.
NOTE: Host cables are not supplied with the MSL Series library.