HP General IO Connectivity How to On-line Replace OLR a J3525A or, J3526A PCI Card using SAM

		OLA/R Overview and Concepts
		How to On-line Replace (OLR) a J3525A or J3526A PCI Card using SAM
		How to On-line Replace (OLR) a J3525A or
		J3526A PCI Card using SAM
		When performing online replacemant, the stack for all the ports
WARNING
		of the interface card under consideration will be stopped before
		repalcement. They will be restarted after the repalcement. Thus
		any user application which has open connections will receive
		DISCONNECT messages. The connections will have to be
		re-established after successful replacement of the interface card.
Step	1.	Start SAM.
Step	2.	From the SAM Areas screen, select PeripheralDevices.
Step	3.	From the PeripheralDevices screen, select Cards.
Step	4.	From the I/O Cards screen, view the list of available I/O cards. Select
		from the possible entries mentioned below:
		• HP J3525A PCI 2-port PSI card
		• HP J3526A PCI 4-port PSI card
Step	5.	From the Menu bar, select Actions.
Step	6.	From the Actions drop-down list, select Replace.
Step	7.	SAM now performs a Critical Resource Analysis (CRA). That is, now that
		you have selected to Replace a card, SAM’s first step is to confirm that
		no critical resources will be disabled when the card is taken off-line.

Chapter 4 107