HP General IO Connectivity manual 184

Tracing and Logging Utilities

nettl

NOTE	The device file must be called x25_npx, where n
	represents the mandatory card instance number (range
	0 to 255). The card instance number is the number
	reported by the ioscan -fcommand output (in the “I”
	column). The (lower case) p is a place holder and x
	represents the port number (1 or 2). p and x are
	required only for systems with dual-port cards.
	-traceoff(-tf)This option turns tracing, specified with the -entity
	option, off.
	-status(-ss) trace Use this option to get a report on the
	tracing/logging status.
	Examples
	To turn tracing on at Level 3 for device x25_1 (interface number 1) and
	receive packet header AND packet data information:
	nettl -tn pduin pduout -e SX25L3 -c x25_1 -f /tmp/tracex25
	To turn tracing off at Level 3 for the device x25_1:
	nettl -tf -e SX25L3 -c x25_1

184 Chapter 7