HP General IO Connectivity manual Table C-3 Packet Not Allowed, Lci

Diagnostic Messages

X.25 Diagnostic Messages

Table C-3	Packet Not Allowed (Continued)
	38	Packet too	Received packet is less than minimum
	(RESTART,	short.	length. It may be a CALL
	CLEAR,		INDICATION packet without address
	RESET)		length or facility length fields, CLEAR
			or RESET INDICATION without
			cause field, or the packet length may
			be insufficient to hold address or
			facility fields.
	39	Packet too	Received packet exceeds maximum
	(RESTART,	long.	length. The packet may be larger than
	CLEAR,		allowed by the configuration and
	RESET)		negotiations (i.e., fast select), or
			contain a field (i.e., call/clear user
			data) that is larger than the allowed
			size.
	41	RESTART or	RESTART REQUEST sent because
	(RESTART,	REGISTRA-	RESTART INDICATION arrived with
	CLEAR,	TION packet	logical channel identifier other than 0.
	RESET)	with
		non-zero
		LCI.
	42 (CLEAR)	Packet type	CALL ACCEPTED or
		not	CONFIRMATION packet received
		compatible	when CALL INDICATION or
		with facility.	REQUEST had fast select with
			restriction on response facility.
	43 (RESET)	Unauthorize	INTERRUPT CONFIRM packet
		d interrupt	received when no matching
		confirmation.	INTERRUPT had been sent.
	44 (RESET)	Unauthorize	Sequence of two INTERRUPT
		d interrupt.	INDICATIONs received and system
			sent no INTERRUPT
			CONFIRMATION packet.

252 Appendix C