HP General IO Connectivity manual Table C-10 Higher Level Initiated Diagnostic

Diagnostic Messages

X.25 Diagnostic Messages

Table C-9	OSI Network Service Problem (Continued)
	233	Reset. Cause	Message (sequence of packets with the
	(RESET)	unspecified.	M bit set followed by packet with M bit
			not set) received, and size exceeds
			maximum size allowed by application
			for inbound data message.
			Corresponds to specific out-of-band
			event delivered to user. Data was
			received on VC without a user, that is,
			an IP or programmatic access
			application. X.25 subsystem was down
			when X.25 to IP subsystem serviced
			incoming DATA on permanent VC.
	234	Reset.	Error returned to the application due
	(RESET)	Congestion.	to network congestion condition.
	235	NSAP	CALL INDICATION was received with
	(CLEAR)	address	unknown NSAP address (first byte of
		unknown.	call user data).
	251	Reset. Cause	System failed to synchronize data
	(RESET)	unspecified.	transfer to interface.
Table C-10	Higher Level Initiated
	Diagnostic	ISO	Explanation
		Description
	241	Disconnectio	Application closed or shut down socket
	(CLEAR)	n normal.	and did not specify cause/diagnostic
			combination to be used on socket. This
			is the default. If available,
			application-specified cause/diagnostic
			combination is used. This is not an
			error condition.
	242	Disconnectio	Application using a socket supporting
	(CLEAR)	n abnormal.	virtual connection crashed. Diagnostic,
			along with a cause code of 0, is used
			regardless of setting of
			cause/diagnostic combination. Related
			to x29server process.

262 Appendix C