HP General IO Connectivity manual Appendix C 257

			Diagnostic Messages
			X.25 Diagnostic Messages
Table C-5	Call Setup, Call Clearing, or Registration Problem (Continued)
	69 (CLEAR)	Invalid	Length of the facility field is greater
		facility/	than the maximum allowed by the
		registration	configured revision level of CCITT
		length.	X.25 Recommendation (63 for 1980,
			109 for 1984). The condition will result
			in an error returned to the user
			instead of generation of CLEAR if it is
			detected in CALL REQUEST.
			No combination of facilities can equal
			the value indicated in the packet’s
			facility length field. If this condition is
			detected in the CALL REQUEST
			packet it produces an error instead of a
			CLEAR.
			System could not add negotiation
			facilities without the facility field
			becoming larger than allowed by the
			configured revision level of the CCITT
			X.25 Recommendation (63 for 1980,
			109 for 1984). This can happen only if
			the configured negotiation facility
			codes are not present in the facility
			field.
	70 (CLEAR)	Incoming	Configuration and status of interface
		call barred.	disallows the opening of new inbound
			connection.
	71 (CLEAR)	No logical	No VC suitable for placing a
		channel	connection in READY (P1) state.
		available.	Generated when CALL REQUEST
			cannot be completed successfully.
			ENOSPC was returned to the caller if
			condition was detected in synchronous
			manner.
			The number of internal connections
			prohibits new connections being
			allocated for CALL INDICATION.

Appendix C 257