HP General IO Connectivity manual Configure Internet Address Field Descriptions

					Configuration
					Configuring the X.25 Link
Step	3. Enter or modify field values as required (refer to the following field
		descriptions).
Table 3-3		Configure Internet Address Field Descriptions
		Internet Address	The identifier by which this interface (port) is
			known on the network. It consists of four sets of
			integer values (0 to 255) separated by periods (for
			example, 192.2.3.6). The IP address must be
			unique for each X.25 interface. It must also
			specify a different subnet from the IP address of
			any other X.25 or LAN interface on this system.
			To obtain an IP address, see your system
			administrator, network administrator, or HP
			representative.
		Subnet Mask	The subnet mask (like IP addresses) is composed
			of four integers (0 to 255) separated by periods.
			The subnet mask is used for routing.
			When you enter an IP address, SAM places a
			default subnet mask in the subnet mask field,
			depending on the class of IP address you enter.
			You may use the default or enter another one if
			required. Table 3-4, “IP Address and Default
			Subnet Masks,” shows the IP addresses listed by
			class and their default subnet masks).
		IP Address Alias	The symbolic name (in alphanumeric format) by
			which this network interface will be known on
			the network. Use the Add/Modify Host Name
			Aliases button to add or modify aliases.
Table 3-4		IP Address and Default Subnet Masks
		IP Address		Class	Default Subnet
					Mask
		A.*.*.* (A between 1 and		A	255.0.0.0
		127)

Chapter 3 39