HP General IO Connectivity manual File Contents, Configuring the x29hosts file, Paduucp Parameters

PAD Services

UUCP Support (x29uucpd)

NOTE	See the man pages for x29uucpd for full details on syntax and
	parameters.
Table 6-1
	File	Contents
	/etc/x25/x29hosts pad_uucp	parameters for each remote
		host
	/etc/passwd	uucp entry
	/etc/x25/x3config	optional X.3 parameters
	/usr/lib/uucp/Systems	remote system’s name
	/usr/lib/uucp/Permissions	remote system’s login name
	/usr/lib/uucp/Devices	device file name

Configuring the x29hosts file

The /etc/x25/x29hosts file must contain a separate pad_uucp section for each remote site. An example pad_uucp section is shown below.

pad_uucp {
device	x25uucp
name	interface0
remote_x121	4085551113
cud	abc
cug	2
logging	3
reverse_charge	enable
x3	hp_uucp
}

pad_uucp Parameters

device	Mandatory. This is the device file name located in the
	/dev/x29 directory. It is created when x29uucpd is
	executed and is used for communication between
	UUCP and x29uucpd. This device file must also exist in
	/usr/lib/uucp/Devices file for the UUCP system.

152 Chapter 6