HP General IO Connectivity manual 146

PAD Services

Remote PAD Printer Support (x29printd)

name	Mandatory. This is the name of the programmatic
	interface that will be used for call setup. There is no
	default for this entry. This name must match the
	programmatic access name (also called name) specified
	in the x25init X.25 configuration file.
remote_x121	Mandatory (no default). This is the X.121 address of
	the PAD device plus the subaddress of the printer. This
	address is required for calls to be initiated. Only digits
	0 through 9 are legal.
cud	Optional. This is the Call User Data (CUD) appended
	to the protocol ID (0x01000000) for any call request
	packets sent to this printer. Only strings of 12
	characters or less are permitted.
cug	Optional. This is the Call User Group (CUG) that will
	be allowed access to the printer. Only integers are
	permitted.
logging	Optional (default = 1). This is the logging level used
	for each printer device. Printer device logging can be
	set to 0, 1, 2, or 3 where the respective values are:
	0 – No logging (do not create a log file).
	1 – Minimum session error logging.
	2 – Error and warning logging.
	3 – Error, warning, information, and status logging.
	HP recommends logging level 0 or 1 for normal
	operation. Logging levels 2 and 3 should only be used
	for troubleshooting for short periods of time.
	Logging messages for x29printd provide descriptions
	of what the messages mean and the actions required to
	correct any errors that may occur. The log file is
	written to

/var/x25/log/x29printd/[device_name][child_process_id].

reverse_charge Optional (default = disabled). Specifies the reverse charge option for the call setup for the particular printer address. It can be disabled (or disable), enabled (or enable).

146 Chapter 6