HP General IO Connectivity manual Appendix C 255

			Diagnostic Messages
			X.25 Diagnostic Messages
Table C-5	Call Setup, Call Clearing, or Registration Problem
	Diagnostic	ISO	Explanation
		Description
	65 (CLEAR)	Facility/	Packet size negotiation, Window Size
		registration	Negotiation or Throughput Class
		code not	Negotiation facility codes found in the
		allowed.	facility field of the call setup packet
			when corresponding negotiation had
			not been configured. In CALL
			REQUEST, condition results in error
			returned to user instead of generation
			of CLEAR.
			If facility checking was configured, a
			facility code not allowed by configured
			level (1980 or 1984) was found before
			the first facility marker. In CALL
			REQUEST, this condition results in an
			error returned to user instead of
			generation of CLEAR.
			If facility checking was configured
			along with rejection of duplicate
			facilities, a combination of invalid
			facility codes was detected.
			The combination may indicate that the
			basic and extended format of given
			facility are present or that both the
			Closed User Group and Closed User
			Group with Outgoing Access facilities
			are present. In CALL REQUEST, this
			condition results in an error instead of
			a CLEAR.
			Facility marker 00 3B (hex) found,
			which corresponds to “internal”
			facilities. This facility marker is not
			allowed by either application or
			network. In CALL REQUEST, this
			condition results in an error returned
			to the user instead of CLEAR.

Appendix C 255