Configuration
Configuring X.25 over LLC2
XOL_logical_port_id 0
XOL_destination_macaddr 0x080009DBEA7
XOL_DSAP 0x70
XOL_SSAP 0x70
The file x25_box_0_host must contain all the mandatory level 2 and level 3 parameters. Along with them it should contain the following entries:
The LLC2 specific configuration file, llc2_lan_1 is created in the /etc/x25 directory with the following entries:
lan11
To start and stop above configuration:
Starting:
Execute the following commands at the command prompt:
x25init
Stopping:
To stop the configuration execute the following commands:
x25stop
To Connect Box 1 to HOST
To implement the above configuration, the following configuration files need to be created on the BOX 1.
•Generic X.25 configuration file, x25_box_1_host
•LLC2 configuration file, llc2_lan_2
The generic X25 configuration file has to be created in the /etc/x25 directory using the example configuration file, /etc/x25/x25init_llc2_smpl.
The file x25_box_1_host must contain all the mandatory level 2 and level 3 parameters. Along with them it must contain the following entries:
device lan2
XOL_logical_port_id 0
XOL_destination_macaddr 0x080009DBEA7
XOL_DSAP 0x7E
XOL_SSAP 0x7E
The LLC2 specific configuration file, llc2_lan_2 is created in the /etc/x25 directory with the following entries:
68 | Chapter 3 |