What water may be used ?, Filling the water tank

1800117435 GV8700 E0 :110x154 16/11/09 9:55 Page 3

Locking system for retaining the iron on the base (Lock-system)

• Your steam generator is equipped with a retaining hoop which locks the iron on	GB
its base for easier transport and storage – fig.1:

-Locking – fig.2

-Unlocking – fig.3

•To carry your steam generator by the iron handle:

-Place the iron on the iron rest of the generator and raise the retaining hoop over the iron until it locks into place (audible click) – fig.2.

-Grasp the handle of the iron to carry your steam generator – fig.1.

Preparation

Due to the powerful steam output, a mesh type ironing board must be used to allow any excess steam to escape and to avoid steam venting sideways.

What water may be used ?

•Your iron has been designed to operate using untreated tap water.

•Heat concentrates the elements contained in water during evaporation. The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining or premature wear of the appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.

If you have very hard water,it is recommendedthat you mix 50% untreatedtapwaterwith store bought distilledor demineralised water in the following proportions : 50% untreated tap water, 50% distilled or demineralised water.

Filling the water tank

•Place your steam generator on a flat, stable, horizontal heat-resistant surface.

•Grasp the handle of the removable tank and pull horizontally to remove it – fig.4.

•Pour in untreated tap water up to the max mark – fig.5.

•Replace it firmly in its housing, making sure it is fully into place – fig.6.

Using your steam generator

•Completely unwind the power cord and the steam cord from tsi storage space– fig.23.

•Lower the retaininghoop (depending on model)to unlock the safety catch – fig.3.

•Plug in your steam generator to an earthed socket.

•Press on the on / off switch. The green light (located on the control panel) flashes and the boiler heats up – fig.7.

When the green “steam ready” light stops flashing (after 2 minutes approximately), the appliance is ready.

The first time the appliance is used, there may be some fumes and smell but this is not harmful. They will not affect use and will disappear rapidly.

Use

Steam ironing

•Place the iron's temperature control slide according to the type of fabric to be ironed (see table below).

•The thermostat light comes on. Be careful ! The steam generator is ready when the thermostat light goes out and when the green “steam ready” light stays on.

•Adjust the steam output control dial (located on the control panel).

•While ironing, the light on top of the iron and the steam ready light turn on and off, as the temperature adjusts without interrupting ironing.

•To o btain s team, press on t he steam control b utton on t he iron ha ndle – fig.8. The steam will stop when yourelease the button.

•When starting, and regularly while it is being used, your steam generator's electric pump injects water into the boiler. It makes a noise but this is quite normal. You may also hear a clicking noise which is the steam valve opening. Again this is normal.

•Always spray starch onto the reverse side of the fabric to be ironed.

GV8700E0, GV8700C0, GV8700G0, GV8700S0 specifications

The Tefal GV8700 series is a remarkable range of garment steamers that cater to both casual users and serious garment care enthusiasts. This innovative line includes models GV8700S0, GV8700G0, GV8700C0, and GV8700E0, each designed to deliver exceptional performance with modern technologies that ensure effective and efficient steaming.

One of the standout features of the GV8700 series is its impressive steam output. With powerful steam bursts, these models are capable of eliminating stubborn wrinkles on various fabric types quickly and efficiently. The continuous steam output varies across the models, ensuring users can find a steamer that fits their needs, whether it’s light steaming or heavy-duty usage.

The unique design of the steam generator allows for a large water tank capacity, which means users can steam more garments in one go without frequent refills. The GV8700 series models are equipped with an easy-to-fill removable water tank that simplifies the steaming process. Additionally, these steamers are fitted with a built-in anti-calc system, which preserves the steamer’s lifespan by preventing limescale build-up.

An ergonomic and lightweight design enhances maneuverability, making it easier for users to operate the steamer comfortably, even during extended usage. The GV8700 models also come with a variety of accessories, including a fabric brush, a steam bonnet, and a specialized heat-resistant mat. These accessories amplify the versatility of the steamers, allowing for better results on different fabric types, from delicate silks to durable linens.

Another notable technology feature within this series is the vertical steaming capability, which allows users to steam garments directly on hangers. This functionality is especially beneficial for quick touch-ups and makes it convenient to manage iron-sensitive garments.

Safety is a key consideration in the Tefal GV8700 series, with features like automatic shut-off when not in use. This not only enhances user safety but also contributes to energy efficiency.

Overall, the Tefal GV8700 line, including models GV8700S0, GV8700G0, GV8700C0, and GV8700E0, sets a high standard in garment steaming technology. With powerful steam performance, ease of use, and thoughtful safety features, these steamers are perfect for maintaining crisp, professional-looking fabrics with minimal effort.