USING THE LCD SCREEN
Adjusting the LCD screen
1.Open up the LCD screen 90° with your fi nger.
2.Rotate it to the best angle to record or play.
Do not lift the HD camcorder by holding the LCD screen.
WARNING
●
●See page 67 to adjust brightness and contrast of the LCD screen.
Using the touch panel
You can play recorded images and set the functions by using the touch panel.
Place your hand on the rear side of the LCD panel to support it. Then, touch the items displayed on the screen.
●Be careful not to press the buttons nearby the LCD panel accidentally while using the touch panel.
●The tabs and indicators that appear on the LCD panel depend on the recording/playback status of your HD camcorder at the time.
●The touch screen may malfunction because of the LCD protection fi lm is that is adhered to it when purchasing the product. Remove and discard the protection fi lm before using.
使用 LCD 显示屏 |
调整LCD显示屏 |
1. 呈90°打开LCD显示屏。 |
2. 转动到最佳角度进行录制或者播放。 |
不要握着LCD显示屏举起数码摄像机。 |
警告 |
• 转动一周会导致内部连接LCD显示屏 |
和高清数码摄像机之间的铰链损坏。 |
• 参见第67页,调整LCD显示屏的亮度 |
和颜色。 |
|
| 用触感控制板 | |
|
| 您可以通过使用触感控制板进行播放录制的图 | |
|
| 像,以及设置一些功能项。 | |
|
| 用手在LCD控制板的后面支撑,然后再用手指触 | |
� | A 가 Language | 碰屏幕上显示的选项。 | |
� | Demo |
|
|
5 / 5 Anynet+ |
|
| |
| • | 请注意当使用触感控制板的时候 | |
|
| ||
|
|
| 不要偶然地触碰LCD控制板区的 |
|
|
| 按钮。 |
|
| • | 在LCD控制板上显示的导航键和指 |
|
|
| 示图标取决于当时您的高清数码摄 |
|
|
| 像机所处的录制/播放状态。 |
|
| • 触摸屏可能会因LCD保护膜（购买 | |
|
|
| 产品时贴上去的）而功能异常。 |
|
|
| 请在使用之前撕下保护膜。 |
23_ English | 中文 _23 |