Teledyne manual Model 7300A Infrared Gas Analyzer, Table of Contents Introduction, Installation

Model 7300A Infrared Gas Analyzer

			Table of Contents
1	Introduction
	1.1	Overview		........................................................................	1-1
	1.2	Typical Gas Applications			1-1
	1.3	Main Features of the Analyzer			1-2
	1.4	General			1-3
	1.5	NDIR Analyzer			1-3
2	Installation
	2.1	Unpacking the Analyzer			2-1
	2.2	Installing & Connecting the Analyzer			2-1
		2.2.1	IUser Connections		2-2
		2.2.2	Electrical Power Connections		2-2
		2.2.3	Calibration Gases		2-2
		2.2.4	Pipe Connection		2-3
		2.2.5	Sample Delivery System		2-3
		2.2.6	Venting the System		2-3
	2.3	Electrical Connections (rear Panel)			2-3
		2.3.1	Primary Input Power		2-4
		2.3.2	Fuse Installation		2-4
		2.3.3 50-Pin Equipment Interface Connector			2-4
		2.3.3.1		Analog Outputs	2-4
		2.3.3.2		Alarm Relays	2-6
		2.3.3.3 Digital Remote Cal Input			2-7
		2.3.3.4		Range ID Relays	2-9
		2.3.3.5 Network I / O			2-9
		2.3.3.6		Remote Valve Connector	2-9
		2.3.4	RS-232 Port		2-10
	2.4	Gas Requirements			2-12
	2.5	Testing the System			2-12
	2.6	Calibration			2-12
		2.6.1	Calibration Fluids		2-12
		2.6.2	Calibration		2-13

ii Teledyne Analytical Instruments