Infrared Gas Analyzer | Maintenance 5 | |
|
|
|
|
|
|
|
|
|
5.0 Maintenance
Aside from normal cleaning and checking for leaks at the gas connec- tions, routine maintenance is limited to replacing filter elements and fuses, and recalibration.
WARNING: SEE WARNINGS ON THE TITLE PAGE OF THIS MANUAL.
5.0Replacing the Fuse
Remove Power to Unit before replacing the fuse.
1.Place small screwdriver in notch, and pry cover off, as shown in Figure
Figure 5-1: Removing Fuse Block from Housing
2.To change between American and European fuses, remove the single retaining screw, flip Fuse Block over 180 degrees, and replace screw.
3.Replace fuse as shown in Figure
Teledyne Analytical Instruments |