DSCover Satellite Products SCW904x manual Installation & Wiring, Technical Summary

Page 5

Section 1: Installation & Wiring

Section 1: Installation & Wiring

This Installation Guide provides the basic installation, wiring and programming information for the PowerSeries Self Contained Wireless (SCW) Security System.

This publication covers the following versions of the SCW Security System:

SCW9045-433 v1.0

SCW9045-868 v1.0

SCW9047-433 v1.0

SCW9047-868 v1.0

 

These models are not UL/ULC Listed (intended for European market only)

TECHNICAL SUMMARY

 

Specifications

 

Temp Range

0°C-49°C (32°F-120°F)

Humidity (Max)

93%RH Non Condensing.

Power Supply

16.5VAC/20VA @50/60Hz.

Current Draw from Transformer

400mA AC (Max.)

Aux+ Output

12.0-12.5VDC/100mA

Features

 

Wireless Zones

32

*On-board I/O

2

Partitions

1

Wireless Keys

16

User Codes

16 + 1 Master Code

Event Buffer

128 Events

LCD Display

2 Rows x 16 Char

Plug-in Transformer

Secondary 16.5 VAC/20-40VA

Battery Backup

7.2VDC@1500 mAH

(24Hr Backup)

 

*I/O Terminals can be configured as Zone Inputs or PGM Outputs When configured as PGMs, outputs are 50mA

Compatible Wireless Devices

SCW9045-433 v1.0

all DSC 433 or 433EU Devices

SCW9047-433 v1.0

all DSC 433 or 433EU Devices

SCW9045-868 v1.0

all DSC 868 Devices

SCW9047-868 v1.0

all DSC 868 Devices

UL Listed Wireless Devices

WS4904(P)

PIR Motion Detector

WS4916

Smoke Detector

WS4945

Door Contact

WS4965

Door Contact

WLS912L-433

Glass Break Detector

WLS914-433

PIR Motion Detector

WS4938

Panic Pendant

WS4939

Wireless Key

Classified in Accordance with ANSI/SIA CP-01-2000 (SIA-FAR)

IMPORTANT NOTE!

This equipment, SCW Alarm System shall be installed and used within an environment that provides the pollution degree max 2 and over-voltages category II NON-HAZARDOUS LOCATIONS, indoor only. The equipment is DIRECT PLUG-IN connected and is designed to be installed, serviced and/or repaired by service persons only; [service person is defined as a person having the appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in performing a task and of measures to minimize the risks to that person or other persons]. There are no parts replaceable by the end-user within this equipment.

The power supply must be direct plug-in,fail safe, with dou- ble or reinforced insulation between primary and secondary circuits. In EU countries it must meet the applicable require- ments of the Low Voltage Directive and protected as per the EN60950-1:2001 Standard Requirements. In all other countries, it must be of an approved type acceptable to the local authori- ties; it is the installer’s responsibility to ensure that the socket- outlet that the transformer is plugged-in, is near the equipment and is easily accessible.

The wiring (cables) used for installation of the SCW Alarm Sys- tem and accessories, shall be insulated with PVC, TFE, PTFE, FEP, Neoprene or Polyamide.

(a)The equipment enclosure must be secured to the building structure before operation.

(b)Internal wiring must be routed in a manner that prevents:

-Excessive strain on wire and on terminal connections;

-Loosening of terminal; connections;

-Damage of conductor insulation

(c)Disposal of the used battery packs shall be made according to the waste recovery and recycling regulations applicable to the intended market.

(d)Before servicing, DISCONNECT the power and telephone connection.

(e)Do NOT route any wiring over circuit boards.

WWW.DIYALARMFORUM.COM1

Image 5
Contents Installation Guide Safety Precautions required during Installation Before Installing The EquipmentSelecting a Suitable Location For The Alarm Controller Table of Contents Page Technical Summary Installation & WiringEnsure connector key is oriented correctly InstallationMax wire Length to End-of-line Resistor WiringBurglary Zone Wiring Chart Self Contained Wireless Alarm System Enter Wireless Enrollment Mode Wireless Device EnrollmentActivate Wireless Device Verify Device Electronic Serial Number ESNZone Dependant Devices Detectors Zone Definitions Options 1 Template ProgrammingDigit 3 selects 1 of the 8 following options Installer Lead-in/Lead-out and DLS Lead-in/Lead-out Existing Installations Refer to .1 Installation on New Installations Refer to .1 Installation onDLS Programming Local Programming with PC-LinkOperation Door Chime Enable/Disable Alarm Memory DisplayTrouble Display Program User CodesInstaller Programming 7x Command Outputs 1&2Additional Keypad Functions 9User Code No-Entry ArmingAdvanced Programming Index to Programming Work Sheets and Descriptions Programming Work SheetsFunction Key Programming Programming WorksheetsFunction Key Options Zone DefinitionsSystem Times Installer’s Code Master Code009 I/O Programming Keypad Lockout OptionsThird System Options Second System OptionsFourth System Options Tenth System OptionsZone Attributes Options 10-13 are reserved for Future Use Zone Loop Response OptionsCross Zone/Police Code Timer PGM Output TimerNo Activity Arming Pre-alert Timer No Activity Arming TimerAlarm Restoral Reporting Codes, Zones Alarm Reporting Codes, ZonesMiscellaneous Alarm Reporting Codes Priority Alarm and Restoral Reporting CodesMiscellaneous Opening Disarming Reporting Codes Tamper Reporting Codes, ZonesTamper Restoral Reporting Codes, Zones Opening/Closing Communicator Call Directions Tamper/Restore Communicator Call DirectionsCommunicator Format Options System Test Transmissions Communicator Call Directions System Maintenance Communicator Call DirectionsCommunication Variables Test Transmission Time of DayDownloading Options Second Communicator OptionsThird Communicator Options Initiate PC-Link Downloading Number of Rings To Answer OnPGM Output Attributes AttributeDelay Between Dialing Attempts Automatic Clock Adjust600 2-way Audio Control Options Applies to SCW9047 only First International OptionsWireless Supervisory Window Wireless programming Wireless Zone ProgrammingWireless Module Placement Test Installer Lockout Enable General Wireless OptionsInstaller Lockout Disable Restore Wireless Device Default ProgrammingLabel Programming Zone Local Keypad ProgrammingAlarm When Armed Event Message Fire Alarm LabelCommand Output #1 Label Command Output #2 LabelFirst Keypad Options Reset Programmable Labels to Factory DefaultsSecond Keypad Options Third Keypad Options002 Zone Definitions Programming DescriptionsKeypad Function Key Programming System Times Installer CodeMaster Code O Programming Zones/PGMsThird System Options First System OptionsSecond System Options OFF Keypad Always Active. The keypad does not blank Fourth System OptionsTenth System Options 134 Zone Attributes Zone Loop Response OptionsDaylight Saving Time Move Clock Ahead Standard Time Set Clock BackCross Zone/Police Code Timer PGM Output TimerNo Activity Arm Timer Call Waiting Cancel StringFirst Communicator Options Communicator VariablesTest Transmission Time Second Communicator Options OFF Closing Confirmation Disabled. The keypad does not beepThird Communicator Options First Downloading OptionsDownloading Computer Phone Number Downloading Access CodePanel Identification Code Number of Rings to Answer OnFollowing attributes are available for PGM Output Type Automatic Clock AdjustWay Audio Control Options applies to SCW9047 only Wireless Programming Delay Between Dialing AttemptsFirst International Options Second International OptionsInstaller Lockout Enable Wireless Module Placement TestInstaller Lockout Disable Restore Wireless Device Default ProgrammingAlarm when Armed Event Message Fire Alarm Labels069 Command Output Label Keypad ProgrammingFirst Keypad Options OFF Power LED is disabled. Option 6 has no effectSecond Keypad Options Option Description Future UseThird Keypad Options Label ResetProgrammed LCD Message Programmed LCD Message DurationTesting & Troubleshooting Trouble 8 Loss of Clock/Date Trouble 4 Failure to CommunicateContact ID Appendix a Reporting Code FormatsSIA Format Automatic Zone Alarm/Restoral Codes Contact ID Zone Alarm/Restoral Event CodesAppendix B Communicator Format Options Residential Dial PagerNorth America Appendix C Regulatory Approvals InformationNew Zealand SIA False Alarm Reduction InstallationsEurope Exit Time Appendix D SIA False Alarm ReductionFormat Reporting Code/Event Appendix E 2-Way Audio Verification SCW9047 onlyVOX Support Key Command DescriptionHang-up Auto-detection Bell/Buzzer Silent During 2-Way AudioPage FCC Compliance Statement