SECTION V
PRE-FAB INSERT INSTALLATION
INSTALLATION PRECAUTIONS
This room heater is listed by
NOTE: A Preway unit has to use insert trim panels.
Other models of those brands may also be acceptable for installation of the Model 20 unit into them. However, factory approval from New Buck Corporation and
INSTALLATION
FIGURE 1 |
|
MINIMUM CLEARANCES
INSTALLATION PREPARATION
Pre-Fab Fireplace
1.Locate furniture and other materials away from the front of the fireplace to allow free access to the fireplace.
2.Cover the hearth and adjacent floor areas with the drop cloth to protect from soiling or marring the surface.
3.Remove the existing fireplace damper plate/damper rod assembly.