Read this manual before installing or operating this appliance.
Please retain this owner’s manual for future reference.
A. Congratulations
Congratulations on selecting a Heat & Glo gas fireplace, an elegant and clean alternative to wood burning fireplaces. The Heat & Glo gas fireplace you have selected is designed to provide the utmost in safety, reliability, and efficiency.
As the owner of a new fireplace, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.
This owner’s manual should be retained for future reference. We suggest that you keep it with your other important documents and product manuals.
The information contained in this owner’s manual, unless noted otherwise, applies to all models and gas control systems.
Your new Heat & Glo gas fireplace will give you years of durable use and
Homeowner Reference Information
We recommend that you record the following pertinent information about your fireplace.
Model Name: ___________________________________________ Date purchased/installed:__________________
Serial Number:__________________________________________ Location on fireplace: _____________________
Dealership purchased from: _______________________________ Dealer Phone: __________________________
Notes: _______________________________________________________________________________________
_____________________________________________________________________________________________
Listing Label Information/Location The model information regarding your specific fireplace can be found on the rating plate usually located in the control area of the fireplace.
Type of Gas
Gas and Electric Information
Heat & Glo, a brand of Hearth & Home Technologies, Inc. 7571 215th Street West, Lakeville, MN 55044
Not for use with solid fuel.
(Ne doit pas entre utilise avec un combustible solide).
Type of Gas (Sorte De Gaz): This appliance must be installed in accordance with local codes, if any; if not, follow ANSI Z223.1 in the USA or CAN/CGA B149 installation codes. (Installer l’appareil selon les codes ou reglements locaux ou, en l’absence de tels reglements, selon les codes d’installation
ANSI Z21XX-XXXX · CSA 2.XX-MXX · UL307B
Minimum Permissible Gas Supply for Purposes of Input Adjustment. |
|
|
| ||||||
Approved Minimum (De Gaz) Acceptable | 0.0 in w.c. | (Po. Col. d’eau) |
|
|
| ||||
Maximum Pressure (Pression) |
| 0.0 in w.c. | (Po. Col. d’eau) |
|
|
| |||
Maximum Manifold Pressure (Pression) | 0.0 in w.c. | (Po. Col. d’eau) |
|
|
| ||||
Minimum Manifold Pressure (Pression) | 0.0 in w.c. | (Po. Col. d’eau) |
|
|
| ||||
Total Electrical Requirements: 000Vac, 00Hz., less than 00 Amperes | MADE IN USA |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
| IN CANADA |
| Model: | XXXXXXXX |
| |||
ALTITUDE: |
| ||||||||
(Modele): |
| ||||||||
MAX. INPUT BTUH: | 00,000 | 00,000 |
|
|
|
|
|
|
|
MIN. INPUT BTUH: | 00,000 | 00,000 |
| Serial | XXXXXXXX |
| |||
ORIFICE SIZE: | #XXXXX | #XXXXX |
|
| |||||
| (Serie): |
| |||||||
Model Number
Serial Number
2 | Heat & Glo • |