F. Install Light Bulbs
Note: Light bulbs are shipped in the installation manual bag.
Ember Lights
1.Remove ember basket by lifting it from fireplace. There is one metal tab on each end of the ember box that engages slots in the ember basket. See Figure 14.9.
Figure 14.9 Ember Basket
2.Install two 20 watt halogen bulbs per side. See Figure 14.10.
NOTICE: Grip bulb by the porcelain base only. DO NOT TOUCH glass bulb. Touching the bulbs with fingers will greatly reduce the operating life of these bulbs.
Figure 14.10 Ember Light Bulb Installed
3.Reinstall ember basket over the ember box by inserting the tabs on the ember box in the slots on the ember basket. See Figure 14.9.
Accent Lights
1.Remove the screw that secures the two bottom sheet metal refractory standoffs that are installed around the left and right accent light assemblies. See Figure 14.13.
2.Install the two accent lights by removing (2) screws that hold the light housing to the firebox bottom. Install bulb by inserting the 2 pins on the bulb base into the 2 holes in the socket. See Figure 14.11 and Figure 14.12.
SCREWS
Figure 14.11 Light Housing Removal
Figure 14.12 Light Housing Removed, Bulb Installed
3.Reinstall accent light cover to light socket assembly and install with two screws to firebox bottom.
4.Reinstall the two bottom sheet metal refractory stand- offs with one screw each. See Figure 14.13.
SHEET METAL
REFRACTORY STANDOFF
Figure 14.13 Accent Light Bulb Installation Completed
Heat & Glo • | 49 |