Nilfisk-Advance America 5200B manual Instructions for USE Starting and Stopping the Machine

Page 10

INSTRUCTIONS FOR USE

STARTING AND STOPPING THE MACHINE

Starting the machine

1.Sit in the driver's seat (27, Fig. B) and, by operating the lever (23) adjust the seat longitudinally, to a comfortable position.

2.Unlock the steering wheel (10, Fig. B) by using the knob (11) and adjust its tilting according to one's comfort; after the adjustment, release the knob (11) and lightly move the steering wheel to hook it on the internal retainer.

3.Insert the ignition key in the switch (18, Fig. B); turn it to “I” position, without activating the pedal (20), then wait (for a few seconds) for the display (5, Fig. B) to turn on and the working hours to appear.

Check that the green warning light turns on (9, Fig.

4.If the warning light becomes red or yellow (7 or 8, Fig.

B)turn the ignition switch to “0” position and remove the key. Charge the batteries (see the procedure in the Maintenance chapter).

NOTE

The seat (27, Fig. B) is equipped with a safety sensor, which allows the machine operation only if the operator is seated on the driver's seat.

5.Disengage the parking brake by pressing the related pedal (26, Fig. B) and unlocking the lever (19).

6.Drive the machine to the working area, with the hands upon the steering wheel (10, Fig. B); press the pedal (20) on the front side to move forward and on the rear side to move backward.

According to the pressure on the pedal, the speed increases form zero to the maximum value.

7.Lower the main broom by operating the lever (24, Fig. B), then activate the vacuum system by operating the lever (17, Fig. B).

8.Lower the right side broom by operating the lever (21, Fig. B).

9.Lower the left side broom by operating the lever (22, Fig. B).

NOTE

All brooms (10, 11, 12, Fig. C) can be lifted or lowered when the machine is moving. When the brooms are lifted, they do not turn.

When the main broom is lifted, the vacuum system is not operating.

10.To sweep, start the machine with the hands upon the steering wheel (10, Fig. B) and press the pedal (20) accordingly.

Stopping the machine

1.To stop the machine, release the pedal (20, Fig. B). To stop the machine quickly, press also the servo brake pedal (26, Fig. B).

In case of emergency, press the emergency push-button (12, Fig. B) to immediately stop the machine. To deactivate the emergency push-button (12) after pressing it, rotate it in the direction indicated by the arrow on the push-button.

2.Turn the ignition switch (18, Fig. B) to “0” position, and remove the key.

3.Engage the parking brake by pressing the brake pedal (26, Fig. B) and by operating the brake lock control lever (19).

MACHINE OPERATION

1.Avoid stopping for a long time with the machine in the same position and the brooms rotating: this could create unwanted marks on the floor.

2.To collect light and bulky waste materials, lift the front skirt by activating the pedal (25, Fig. B); consider that the vacuum capability of the machine is reduced when the front skirt is lifted.

WARNING!

When operating on wet grounds, it is essential to deactivate the vacuum system by operating the lever (17, Fig. B) to prevent the dust filter from being damaged.

3.For the machine proper operation, the dust filter must be as clean as possible. To clean it while sweeping, proceed as follows:

–Lift the main broom by operating the lever (24, Fig. B) to deactivate the vacuum system;

–Press the filter shaker push-button (14, Fig. B) at short intervals;

–Then, lower the main broom to activate the vacuum system again, and resume operation. Repeat the operation at least every ten minutes while working (according to the area dusty conditions).

NOTE

This operation can be performed also when the machine is moving.

NOTE

When the dust filter is obstructed and/or the hopper is full, the machine cannot collect dust and debris anymore.

4.The hopper (4, Fig. C) should be dumped after each working period and whenever it is full.

8

Terra™ 5200B – 146 1996 000(2)2004-08

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instrucciones DE USO Mode D’EMPLOI ET D’ENTRETIENInstructions for USE Instruções DE USO14 15 Terra 5200B 146 1996Troubleshooting Scrapping MaintenanceSafety Functions Instructions for USE IntroductionIntroduction Instructions for USE General Instructions UnpackingConventions Machine DescriptionTerra 5200B Sweeper Operation DescriptionInstructions for USE Technical Data Wiring diagram See Fig. AFUSE ACCESSORIES/OPTIONSBattery CHECK/SETTING on a NEW Machine FusesWET or GEL battery setting Battery Installation and WET or GEL Battery SettingBattery installation Before Machine START-UPStarting the machine Instructions for USE Starting and Stopping the MachineMachine Operation Stopping the machineMachine Long Inactivity Working Light AdjustmentInstructions for USE Hopper Dumping First Period of USEMaintenance Scheduled Maintenance TableBrooms of various hardness are available This procedure is applicable to all types BroomsTighten the locknut 2, Fig. E Brooms of various hardness are available Remove the internal pocket separator 7, Fig. AC Hopper Lifting System Hydraulic OIL Level Check Battery ChargingSkirt Height and Operation Check Side skirtSafety Functions TroubleshootingScrapping USO Instrucciones DE USO IntroducciónDescripción DE LA Máquina MantenimientoIntroducción Instrucciones DE USO Instrucciones Generales DesembalajeConvenciones Descripción DE LA MáquinaDescripción Esquema eléctrico Véase Fig. AF Instrucciones DE USO Datos TécnicosCódigos colores BK Negro BU Azul BN Marrón GN Verde GY Gris ACCESORIOS/OPCIONES USOFusibles CONTROL/PREPARACIÓN Baterías EN LA Máquina NuevaInstalación de las baterías Antes DE LA Puesta EN Marcha DE LA MáquinaSin baterías Regulación de batería WET o GELPuesta en marcha Máquina EN FunciónParada de la máquina Periodo DE Larga Inactividad DE LA MáquinaAjuste DE LA LUZ DE Trabajo Primer Periodo DE UtilizaciónMantenimiento Esquema DE Mantenimiento ProgramadoHay cepillos con cerdas más o menos Mm 0,79 1,57Instrucciones DE USO Control Y Ajuste DE LA Altura DEL Cepillo Lateral LateralesAdemás del filtro de papel estándar, hay Los filtros de bolsas de fibra de poliésterNecesitan una limpieza mucho más Estos tipos Procedimiento siguienteCarga DE LAS Baterías Control Altura Y Funcionamiento DE LAS Puertas AbatiblesPuerta abatible lateral Interruptor DE Asenso Marcha Funciones DE SeguridadBúsqueda Averías Pulsador DE EmergenciaEliminación Utilisation Mode D’EMPLOI ET D’ENTRETIEN IntroductionDescription DE LA Machine EntretienBut ET Contenu DU Manuel Mode D’EMPLOI ET D’ENTRETIENSymboles Utilises DestinatairesMode Demploi ET Dentretien Instructions Generales Description DE LA Machine Mode D’EMPLOI ET D’ENTRETIEN DeballageCapacites Operationnelles DE Terra 5200B BE1 Feu clignotant optionnel BZ1 Mode Demploi ET Dentretien Caracteristiques TechniquesSchéma électrique Voir Fig. AF ArrièreCONTROLE/PREPARATION DES Batteries SUR UNE Machine Nouvelle ACCESSOIRES/OPTIONSUtilisation Avertissement ConsultationAvant LA Mise EN Marche DE LA Machine Mode Demploi ET DentretienInstallation des batteries Sans batteriesDébloquer le volant 10, Fig. B au moyen du bouton Machine AU TravailMise en marche Arrêt de la machineInactivite Prolongee DE LA Machine Reglage DU Phare DE TravailPremiere Periode Dutilisation Entretien Plan Recapitulatif Dentretien ProgrammeSerrer le contre-écrou 2, Fig. E Remplacement DES Brosses Laterales Controle ET Reglage DE LA Hauteur DES Brosses LateralesContrôler que le corps du filtre n’a pas de déchirures 12. Déposer le séparateur intérieur poches 7, Fig. ACVolets latéraux Controle DE LA Hauteur ET DU Fonctionnement DES VoletsChargement DES Batteries Volets avant et arrièreInterrupteur DE Marche Fonctions DE SecuriteDepistage DES Pannes BOUTON-POUSSOIR DurgenceMise EN Decharge Manutenção Instruções DE USO IntroduçãoDescrição DA Máquina Funções DE SegurançaIntrodução Instruções DE USO Instruções Gerais DesempacotamentoConvenções Descrição DA MáquinaFuncionamento DA Máquina DE Varrer Terra 5200B DescriçãoTrás Instruções DE USO Dados TécnicosEsquema elétrico Ver a fig. AF Códigos de coresACESSÓRIOS/OPÇÕES VERIFICAÇÃO/CONFIGURAÇÃO DE Bateria EM UMA Máquina NovaFusíveis Perigo Atenção Advertência ConsultaAntes DA Partida DA Máquina Configuração das baterias WET ou GELInstalação E Definição DE Bateria WET OU GEL Baterias não fornecidasPartida da máquina Instruções DE USO Partida E Parada DA MáquinaMáquina EM Funcionamento Parada da máquinaPeríodo Inicial DE USO Ajuste DA LUZ DE TrabalhoDesativação Prolongada DA Máquina Máquina está pronta para retomar o trabalhoManutenção Tabela DE Manutenção ProgramadaSão fornecidas vassouras com vários tipos Verificação E Regulação DAAltura DA Vassoura Central Aperte a porca de aperto 2, fig. EInstruções DE USO Verificação E Regulação DA Altura DAS Vassouras LateraisQuando as superfícies de filtragem já não Os filtros de bolsa em poliésterSer aplicado a qualquer tipo Procedimento indicado a seguir Forem adequadas, será necessárioCarregamento DA Bateria Verificação DA Altura E do Funcionamento DAS AbasAba lateral Interruptor DE Consentimento DE Funcionamento Funções DE SegurançaLocalização DE Defeitos Interruptor DE EmergênciaDescarte S310215 200 BAR Terra 5200B 146 1996 Nilfisk-Advance, Inc

5200B specifications

The Nilfisk-Advance America 5200B is a powerful and reliable walk-behind scrubber designed for efficiency and performance in a variety of cleaning environments. This machine is particularly well-suited for medium-sized to large facilities such as schools, hospitals, retail spaces, and warehouses, where cleanliness is paramount.

One of the standout features of the Nilfisk 5200B is its robust design, which incorporates durable materials to withstand the rigors of constant use. It boasts a compact frame that allows for excellent maneuverability in tight spaces while still maintaining a generous cleaning path. The machine is equipped with a 20-inch scrubbing width, enabling it to cover significant ground in a single pass.

The 5200B uses advanced scrub technologies that enhance its cleaning capabilities. One notable innovation is its dual brush system, which delivers superior scrubbing power and provides effective cleaning on various floor surfaces, including tile, concrete, and vinyl. The adjustable brush pressure feature allows operators to customize the scrubbing intensity based on the specific needs of the flooring and environment.

Efficiency is a key concern for any cleaning operation, and the 5200B addresses this through its impressive water management system. The machine is designed to optimize water usage, reducing waste and promoting eco-friendly cleaning practices. Its solution control feature allows for precise dispensing of cleaning solution, ensuring that the right amount is used for every job, further enhancing both efficacy and cost savings.

In terms of user comfort, the Nilfisk 5200B is equipped with an ergonomic handle and easy-to-use controls that minimize operator fatigue during extended cleaning sessions. The intuitive dashboard provides real-time feedback and monitoring, making it simple for users to track maintenance needs and performance metrics.

Another significant characteristic of the 5200B is its low noise level, which makes it ideal for use in noise-sensitive areas. This means that cleaning can be performed during business hours without disrupting customers or staff.

With its blend of robust construction, advanced cleaning technologies, and user-focused features, the Nilfisk-Advance America 5200B is an outstanding choice for organizations seeking an efficient and effective cleaning solution. This machine not only enhances cleanliness but also contributes to a safer and more pleasant environment for all who inhabit the spaces it cleans.
Top Page Image Contents