Introduction

INSTRUCTIONS FOR USE

SPARE PARTS AND MAINTENANCE

MANUAL PURPOSE AND CONTENTS

The purpose of this manual is to provide the Customer with all necessary information to use the machine properly in a safe and autonomous way. This includes information about technical characteristics, operation, machine inactivity, maintenance, spare parts and safety conditions. Before carrying out any procedure on the machine, the Operators and qualified Technicians must read this manual carefully. Contact the Manufacturer in case of doubts regarding the interpretation of the instructions and for any further information.

TARGET

This manual is intended for the Operator and the Technicians qualified for the machine maintenance.

The Operators must not carry out operations reserved for qualified Technicians. The Manufacturer will not be answerable for damages coming from the non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The Instructions for Use must be kept near the machine, inside an adequate case, far from liquids and other substances that can cause damage to it.

IDENTIFICATION DATA

The machine model and serial number can be found on a plate (28, Fig. B) affixed to the machine steering column and readable from outside. The machine production year is shown after the date Code on the serial plate (A04 means January 2004).

This information is useful when requiring machine replacement parts. Use the following table to write down the machine identification data for any further reference.

MACHINE model .........................................................

MACHINE serial number .............................................

OTHER REFERENCE MANUALS

–Spare Parts List (supplied with the machine).

–Service Manual (that can be consulted at any Nilfisk-Advance Service Center).

All necessary operating, maintenance and repair procedures must be carried out by qualified personnel or by Nilfisk-Advance Service Centers. Only original spare parts and accessories must be used.

Call Nilfisk-Advance for service or to order spare parts and accessories, specifying the machine model and serial number.

CHANGES AND IMPROVEMENTS

Our Company constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefits to the machines that were sold previously.

Any modifications and/or addition of accessory must be approved and performed by the Manufacturer.

SAFETY

The following symbols indicate potentially dangerous situations. Always read this information carefully and take the necessary precautions to protect people and objects. The machine Operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent Operator is the best guarantee against accidents and is essential for successful completion of any prevention program.

SYMBOLS

DANGER!

It indicates a dangerous situation (risk of death) for the Operator.

WARNING!

It indicates a potential risk of injury for people.

CAUTION!

It indicates a caution or a remark related to important or useful functions. Pay particular attention to the paragraphs marked by this symbol.

CONSULTATION

Consult the Instructions for Use before performing any operation.

2	Terra™ 5200B – 146 1996 000(2)2004-08

5200B specifications

The Nilfisk-Advance America 5200B is a powerful and reliable walk-behind scrubber designed for efficiency and performance in a variety of cleaning environments. This machine is particularly well-suited for medium-sized to large facilities such as schools, hospitals, retail spaces, and warehouses, where cleanliness is paramount.

One of the standout features of the Nilfisk 5200B is its robust design, which incorporates durable materials to withstand the rigors of constant use. It boasts a compact frame that allows for excellent maneuverability in tight spaces while still maintaining a generous cleaning path. The machine is equipped with a 20-inch scrubbing width, enabling it to cover significant ground in a single pass.

The 5200B uses advanced scrub technologies that enhance its cleaning capabilities. One notable innovation is its dual brush system, which delivers superior scrubbing power and provides effective cleaning on various floor surfaces, including tile, concrete, and vinyl. The adjustable brush pressure feature allows operators to customize the scrubbing intensity based on the specific needs of the flooring and environment.

Efficiency is a key concern for any cleaning operation, and the 5200B addresses this through its impressive water management system. The machine is designed to optimize water usage, reducing waste and promoting eco-friendly cleaning practices. Its solution control feature allows for precise dispensing of cleaning solution, ensuring that the right amount is used for every job, further enhancing both efficacy and cost savings.

In terms of user comfort, the Nilfisk 5200B is equipped with an ergonomic handle and easy-to-use controls that minimize operator fatigue during extended cleaning sessions. The intuitive dashboard provides real-time feedback and monitoring, making it simple for users to track maintenance needs and performance metrics.

Another significant characteristic of the 5200B is its low noise level, which makes it ideal for use in noise-sensitive areas. This means that cleaning can be performed during business hours without disrupting customers or staff.

With its blend of robust construction, advanced cleaning technologies, and user-focused features, the Nilfisk-Advance America 5200B is an outstanding choice for organizations seeking an efficient and effective cleaning solution. This machine not only enhances cleanliness but also contributes to a safer and more pleasant environment for all who inhabit the spaces it cleans.