Before Machine START-UP

INSTRUCTIONS FOR USE

3.Fill up each battery element with sulfuric acid for batteries (density from 2.80 to 2.84 lb at 77 °F (1.27 to 1.29 Kg at 25°C)) in accordance with the instructions specified in the Battery Instruction Manual.

The correct quantity of sulfuric acid is indicated in the Battery Instruction Manual.

Let the battery rest and fill in with sulfuric acid in accordance with the instructions specified in the Battery Instruction Manual.

4.Charge the battery (see the procedure in the Maintenance chapter).

c)Without batteries

1.Buy appropriate batteries (see the Technical Data paragraph and the installation diagram (15, Fig. V)).

Apply to battery qualified retailers to choose and install the battery.

2.Install and set the machine batteries according to WET or GEL batteries (see the procedure in the following paragraph).

3.Recharge the batteries (see the procedure in the Maintenance chapter).

BATTERY INSTALLATION AND WET OR GEL BATTERY SETTING

Battery installation

1.Install the batteries on the machine according to the diagram (15, Fig. V).

According to the battery dimensions, check if it is possible to put them inside the related plastic container, supplied with the machine.

If the batteries dimensions are larger than the container capacity, use the square guides, supplied with the machine, to ensure the stability inside the battery compartment.

WARNING!

Non-sealed lead/acid batteries always need an appropriate container to prevent the acid form leaking.

Do not install the non-sealed lead/acid batteries without an appropriate container.

WET or GEL battery setting

NOTE

The machine factory setting is for lead (WET) batteries. If this setting corresponds to the type of battery installed on your machine, do not set the batteries.

Otherwise, perform the following operations:

2.It is necessary to set the electronic board of the machine according to the type of batteries installed (WET or GEL). Proceed as follows:

–Turn the ignition switch (18, Fig. B) to “0” position;

–Open the hood (13, Fig. C) and hold it by using the related rod (16, Fig. V);

–Disconnect the battery connector (4, Fig. V);

–Remove the screws (1, Fig. AD) and carefully pull out the right control panel (2);

–Install a jumper wire (1, Fig. AE) on the WET connectors (2) for lead batteries or on the GEL connectors (3) for gel batteries;

–Carefully reassemble the control panel (2, Fig. AD) and fix it by using the related screws (1);

–Reconnect the battery connector (4, Fig. V);

–Disengage the lock rod (16, Fig. V) and close the hood (13, Fig. C).

1.Check that there are no open doors/hoods and that the machine is in normal operating conditions.

2.If the machine has not been used after being transported, check that all the blocks used for the transportation have been removed.

146 1996 000(2)2004-08 – Terra™ 5200B

5200B specifications

The Nilfisk-Advance America 5200B is a powerful and reliable walk-behind scrubber designed for efficiency and performance in a variety of cleaning environments. This machine is particularly well-suited for medium-sized to large facilities such as schools, hospitals, retail spaces, and warehouses, where cleanliness is paramount.

One of the standout features of the Nilfisk 5200B is its robust design, which incorporates durable materials to withstand the rigors of constant use. It boasts a compact frame that allows for excellent maneuverability in tight spaces while still maintaining a generous cleaning path. The machine is equipped with a 20-inch scrubbing width, enabling it to cover significant ground in a single pass.

The 5200B uses advanced scrub technologies that enhance its cleaning capabilities. One notable innovation is its dual brush system, which delivers superior scrubbing power and provides effective cleaning on various floor surfaces, including tile, concrete, and vinyl. The adjustable brush pressure feature allows operators to customize the scrubbing intensity based on the specific needs of the flooring and environment.

Efficiency is a key concern for any cleaning operation, and the 5200B addresses this through its impressive water management system. The machine is designed to optimize water usage, reducing waste and promoting eco-friendly cleaning practices. Its solution control feature allows for precise dispensing of cleaning solution, ensuring that the right amount is used for every job, further enhancing both efficacy and cost savings.

In terms of user comfort, the Nilfisk 5200B is equipped with an ergonomic handle and easy-to-use controls that minimize operator fatigue during extended cleaning sessions. The intuitive dashboard provides real-time feedback and monitoring, making it simple for users to track maintenance needs and performance metrics.

Another significant characteristic of the 5200B is its low noise level, which makes it ideal for use in noise-sensitive areas. This means that cleaning can be performed during business hours without disrupting customers or staff.

With its blend of robust construction, advanced cleaning technologies, and user-focused features, the Nilfisk-Advance America 5200B is an outstanding choice for organizations seeking an efficient and effective cleaning solution. This machine not only enhances cleanliness but also contributes to a safer and more pleasant environment for all who inhabit the spaces it cleans.