Elinchrom 2 IT, 4 IT operation manual Included basic features

Included basic features English

The following basic features are easy to access and they are similar to previous Elinchrom compact flashes.

•Flash power up and down buttons

•Modelling lamp mode button (prop / min /max / off)

•Photocell on / off button

•Ready charge beep on / off button

•Test-flash button

•3.5 mm synchronisation socket

•NEW EL-Skyport Wireless Triggering. Note: To function the integrated Receiver requires the optional EL-Skyport Transmitter.

Additional advanced programmable features

All the new features and functions can be customised.

Please read carefully how to configure the new features.

“Eye-Cell” automatic & manual mode

Some cameras may release before the main-flash, several pre-flashes to avoid the red eye effect. In this case a normal photocell would respond and release a flash with the first pre-flash of the camera. To avoid incorrect synchronisation the intelligent Elinchrom Eye-Cell detects camera pre-flashes. The Eye-Cell function can be activated in “Automatic Mode” or in “Manual Mode”, even confiiguring LED pre-flashes. (Only for advanced users, read carefully the instruc- tions before changing any parameters).

EL-Skyport wireless triggering & remote control

D-Lite it can be triggered using EL-Skyport Transmitter.

“Group” and “ Channel Frequency” settings can be customised on each D-Lite it unit.

Power and modelling lamp steps setup

Normally flash power adjustments are in 1/10th steps per touch. While modelling lamp can be operated in (prop / min / max /off) modes.

Temperature controlled FAN management

The cooling fan switches ON automatically if the unit temperature increases. The microprocessor controls the unit temperature and the fan. If the ventilation is blocked or the fan does not work, the display shows E8.

5